Denon ADV-M71 Home Theater System User Manual


 
ENGLISH
80
Special play modes for MP3/WMA and JPEG files
Use the 0 and 1 cursor buttons to select the play mode, the and ª cursor buttons to select the special play mode.
FOLDER (the MP3/WMA and JPEG files in the folder are played in order starting from the selected file)
FOLDER REPEAT (all the MP3/WMA and JPEG files in the folder are played repeatedly starting from the selected file)
DISC (all the MP3/WMA and JPEG files on the disc are played in order starting from the selected file)
DISC REPEAT (all the MP3/WMA and JPEG files on the disc are played repeatedly starting from the selected file)
RANDOM ON (all the MP3/WMA and JPEG files in the folder are played in random order starting from the selected file)
TRACK REPEAT (the select MP3/WMA or JPEG file is played repeatedly)
NOTES:
The ADV-M71 is compatible with image data stored in JPEG format, but Denon does not guarantee that all image data stored in JPEG
format can be viewed.
Pictures with resolutions of up to 2048 x 1536 pixels can be displayed.
It may not be possible to play some CD-Rs/RWs due to disc properties, dirt, scratches, etc.
When storing JPEG files on the CD-R/RW, set the writing program to store the files in the “ISO9660 level 1” format.
Be sure to give JPEG files the extension “.JPG” and “.JPE”. Files with other extensions or with no extensions cannot be viewed on the
ADV-M71.
Do not apply stickers, tape, etc., to either the label side or the signal side of CD-R/RW discs. If adhesive gets on the surface of a disc,
the disc may get stuck inside the ADV-M71 and be impossible to eject.
Do not play CD-R/RW discs containing any files other than music CD files (in CDA format), MP3/WMA and JPEG files. Doing so may
result in malfunction or damage, depending on the type of file.
JPEG files written using Macintosh computers cannot be played.
To view several of the still pictures stored on the disc at once:
Press the STOP button to display up to 9 still pictures at once.
To select and view a still picture (to start the slide show from a specific still picture), use the cursor buttons (
ª
,
,
0
and
1
) to select the
desired still picture, then press the ENTER button.
To temporarily stop the slide show:
Press the PAUSE button.
To resume the slide show, press the PLAY button.
To cue a still picture you want to view (from which you want to start the slide show):
During the slide show, press one of the SKIP (
8
,
9
) buttons. Press the SKIP
8
button to cue back to the previous still picture, the
SKIP
9
button to cue ahead to the next still picture.
Flipping and rotating still pictures:
Use the cursor buttons (
ª
,
,
0
and
1
) to flip the still picture.
cursor button: The currently displayed still picture is flipped vertically.
ª
cursor button: The currently displayed still picture is flipped horizontally.
0
cursor button: The currently displayed still picture is rotate 90° counterclockwise.
1
cursor button: The currently displayed still picture is rotate 90° clockwise.
Play the image in the zoom mode.
When the ZOOM button is pressed while playing a JPEG image (“ZOOM ON” is displayed on the screen at this time) zoom in and zoom
out using the search keys.
(
6
: zoom out,
7
: zoom in)
When the image is zoomed, use the cursor buttons (
ª
,
,
0
and
1
) to move the zoomed picture.
Continuous playback (SLIDE SHOW) is not possible in the zoom mode.
The way of switching to the next image during continuous JPEG image playback (SLIDE SHOW) can be selected.
Press the SLIDE MODE button on the remote control unit.
Select from SLIDE SHOW MODE 1 to MODE 11, MODE RAND and MODE NONE.