Denon ADV-M71 Home Theater System User Manual


 
31
ENGLISH
4
Press the ENTER button to display the
menus setting screen.
On the setting screen, the selected
item is displayed in yellow and the
values of the other items are
displayed in green.
ENTER
Remote control unit
[1] TV screen size setting
The currently set value is displayed in yellow.
5
Use the
and
ª cursor buttons to
select the desired TV screen size and
display type.
The selected TV screen size is
displayed in yellow and the
description is displayed in green.
Remote control unit
6
Press the ENTER button to set the
selected setting.
The screen shown below appears.
ENTER
Remote control unit
6
[2] Speaker system settings
•“Return is displayed in yellow.
The currently set value is displayed in green.
If you do not want to change the setting, press the ENTER
button at Return. The screen in step 2 reappears.
To change the setting, proceed to step 7 below.
7
Use the
and
ª cursor buttons to
select the speaker system to be used.
Remote control unit
8
Press the ENTER button to set the
selected setting.
For settings other than 5.1-chanel
surround, the setup screen in step 2
reappears.
/
The setup mode is quit in step 12.
The setup mode can also be quit by
using the
and
ª cursor buttons at
the setup screen to select EXIT
SETUP then pressing the ENTER
button.
If 5.1-chanel surround is selected,
the screen shown below appears.
ENTER
Remote control unit
[3] Room and Seating position settings
The currently set value is displayed in green.