Denon ADV-M71 Home Theater System User Manual


 
ENGLISH
58
(3) Playback using the Dolby Headphone mode
The ADV-M71 is equipped with the Dolby Headphone mode, a technology developed jointly by Dolby Laboratories and Lake Technology for
achieving 3D sound over regular headphones.
The Dolby Headphone mode is set when headphones are connected to the ADV-M71s headphones jack.
There are actually four Dolby Headphone modes creating different sound field effects: DH1, DH2, DH3 and Bypass (normal stereo playback).
The Dolby Headphone mode is compatible with Dolby Digital and DTS multi-channel sources. With 2-channel sources, playback in the Cinema,
Music 1 and Music 2 modes can be selected with the 2-channel mode setting.
B
BAND
PHONES
VOLUME
ON / STANDBY
DVD SURROUND RECEIVER ADV-M71
TONE /SDB
FUNCTION
MENU/ SET
+
-
SURROUND /SELECT
PUSH
-
PARAM.
2,3
1
RC-966
A / V
3
STAT U S
RETURN
ANGLE AUDIO
SUB TITLE
SETUP TONE /SDB
FUNCTIONSURROUNDINPUT MODETEST TONE
DVD
ENTER
MUTING
DISPLAY MENU
TOP MENU
SYSTEM MD
CDR TAPE
TUNERTV / VCR
SURROUND
PARAMETER
CH SELECT
-
+
VCR CH
IN
/
SURR.
IN
/
SURR.
DVD
9
8
21
76
+
-
3
2
1
Connect headphones (sold separately) to the headphones
jack.
When headphones are plugged in, the output to the
speakers is automatically turned off and no sound is
produced from the speakers.
PHONES
2
Press the surround parameter button and display the
surround parameters.
When the function is set to DVD, this is also shown on the
display.
SURROUND/ SELECT
PUSH
-
PARAM.
Main unit
SURROUND
PARAMETER
Remote control unit
3
Set the various surround parameters.
If nothing is done for 6 seconds from when the parameter
is displayed, the normal display reappears.
SURROUND/ SELECT
PUSH
-
PARAM.
Main unit Remote control unit
Dolby H mode setting
DH2 DH3 BYPASS
,/
DH1
2-channel mode setting
The mode switches as shown below each time a button is
operated.
CINEMA
MUSIC2
MUSIC1
Can be selected when there is no signal or when playing a
2-channel source.
There are also the same parameters as those described under
(2) Playing in the Dolby Virtual Speaker mode, namely:
B D.COMP. setting
B LFE level setting
B DEFAULT setting
When the surround parameters are displayed, use the and ª
cursor buttons on the remote control unit to switch to previous or
following items.
HDH1
2 CINEMA