Denon ADV-M71 Home Theater System User Manual


 
63
ENGLISH
15
LISTENING TO THE RADIO
1
Press the FUNCTION button and select “TUNER”.
2
Select “FM” or “AM”.
The selected “FM AUTO”, “FM MONO” or “AM” is
displayed.
When using the remote control, the mode button is used to
select FM AUTO and MONO.
3
Adjust the receiving frequency.
When a station is received, the “TUNED” indication will
light.
NOTE:
A humming sound may be heard when using a TV nearby while
receiving AM programs. If this happens, move the system as far
from the TV as possible.
Auto tuning
When one of the Tuning +/– button is pressed, the frequency
changes in steps of 50 kHz in the FM band, 9 kHz in the AM
band.
If one of the Tuning +/– button is held for over 1 second, the
frequency continues to change when the button is released
(auto tuning) and stops when a station is tuned in.Tuning will not
stop at stations whose reception is poor.
To stop the auto tuning function, press the Tuning +/– button
once.
FM Stereo Reception
When a program being broadcast in “FM AUTO” is received,
the “ST” indicator lights and the program is received in stereo.
If reception is poor and there is much noise in the stereo signals,
press the BAND or MODE button to set the FM MONO mode.
(1) Tuning
Example: Tuning in FM/AM stations
B
BAND
PHONES
VOLUME
ON / STANDBY
DVD SURROUND RECEIVER ADV-M71
TONE /SDB
FUNCTION
MENU/ SET
+
-
SURROUND /SELECT
PUSH
-
PARAM.
12
3
FUNCTION
FUNCTION
Main unit Remote control unit
BAND
RANDOM
BAND
Main unit Remote control unit
+
-
+
-
A / V
A-B REPEAT
SEARCH MODE
ONOFF
REPEAT RANDOM
CLEAR ZOOMSLIDE MODE
PROG/ DIRECT
MEMO BANDMODE
STAT U S
FUNCTIONSURROUNDINPUT MODETEST TONE
DVD
TUNER
CH
3
-
+
21
654
987
0
/
10
CALL
+
10
SYSTEM MD
CDR TAPE
TUNERTV / VCR
VCR
NTSC/PAL
SLEEP
ENTER EDIT
/
MENUCHARAC.
REC
TIMETITLE
TUNING /
TV VOL
TV CH TV CH
TUNERDVD
MD/ LINE-1
TAPE/ LINE-2
AUTO DECODE
VIRTUALDIRECT
5CH STEREO
STEREO
D.AUX
IN
/
SURR.
IN
/
SURR.
DVD
T VTV INSOURCE
9
8
21
76
+
-
CD SRS
RTCT
PTYRDS
2
2
3
1
+
-
+
-
TUNING /
Main unit Remote control unit
A / V
SYSTEM MD
CDR TAPE
TUNER TV / VCR
IN
/
SURR.
IN
/
SURR.
DVD
Set the remote
control selector
switches to A/V
and TUNER.
PROG/ DIRECT
MODE
About the tuning mode and the preset mode
The function of the “–” and “+” buttons
on the main unit can be switched so that
they can be used for either tuning
(selecting the reception frequency) or for
selecting preset stations.
The buttons are set to the tuning mode
upon shipment. The mode can be switched
to the preset mode by pressing the “+”
button while pressing in the BAND button.
(When this is done, “PRESET” is flashes for
approximately 5 seconds.)
Press the “–” button while pressing in the BAND button to
switch to the tuning mode. (When this is done, “TUNING” is
flashes for approximately 5 seconds.)
+
-
Main unit
BAND
Main unit