Filter
Top Products
Step 5
38
Installation Procedures
Figure 44
Manually raise reflector to attach remaining end of elevation strut to elevation axis
bracket of main triangle assembly as shown in Figures 45 and 46.
•
Use ¾ x 4-½ in. bolt, lockwasher and nut
Figure 45
Figure 46
You have now completed the attachment of the reflector to the tripod ground mount
assembly. If assembling a ES45T-R antenna, proceed to the Elevation and Azimuth
Adjustments section for instructions on aiming your antenna at its desired satellite.
ES45T-R Reflector Assembly