Andrew ES45T Stereo System User Manual


 
Step 4
Step 5
34
Installation Procedures
Loosely attach support angles (P/N 49436) to three tee plates (P/N 202447) as shown in
Figure 37.
Use A-325 ½ x 1-¼ in. bolts, flatwashers and nuts. (see page 12)
Install bolts from concave side of reflector
Angles should be installed with edge in and flat side away from reflector as shown.
Figure 37
Loosely attach support angles (P/N 49438) from plates E and A to angle (P/N 49436)
from tee plate F with pivot bracket (P/N 300758) as illustrated in Figure 38.
Figure 38
ES45T-R Reflector Assembly