Filter
Top Products
Step 8
Step 9
26
Installation Procedures
Loosely attach segment E-F to mounting ring hub, diameter setting bands and segments
A-F and D-E with joining plates (P/N 49425) along reflector panel seams E-E and F-F.
Loosely attach joining plates (P/N 49693) on rim seams E-E and F-F as illustrated in
Figure 26.
Figure 26
Station an installer inside reflector to finger-tighten seam hardware and attach final pan-
els as pictured in Figure 27.
Figure 27
ES45T-R Reflector Assembly