Filter
Top Products
Step 6
Step 7
25
Installation Procedures
Figure 24
Loosely attach joining plate (P/N 49693) along A-A seam inside reflector rim as shown in
Figure 25.
• Insert ¼-20 capscrews from outside reflector rim
Figure 25
ES45T-R Reflector Assembly
Loosely attach segment A-F to mounting ring hub, diameter setting bands and segment
A-B using joining plates (P/N 49425) along reflector panel seam as pictured in Figure 24.
• Place spacers (P/N 200215) between first and third segments
• Insert ¼-20 capscrews from concave side of reflector segments