A SERVICE OF

logo

144
3. Select an administrator device and follow the
prompts.
Credential Storage
This option allows certain applications to access
secure certificates and other credentials.
Certificates and credentials can be installed to the
SD card and password protected.
1. Press and then tap
(
Settings
)
Location and security
.
2. Tap
Use secure credentials
to activate this
feature. A check mark displayed next to the
feature indicates secure credentials is active.
3. Tap
Install from SD card
to install encrypted
certificates from the memory (SD) card.
4. Tap
Set password
to set or change the
credential storage password.
5. Tap
Clear storage
to clear the storage (SD card
or phone memory) of all contents and reset
the credentials password.
Applications
This phone can be used for Android development.
You can write applications in the SDK and install
them on this device, then run the applications using
the hardware, system, and network. This feature
allows you to configure the device for development.
Warning!
Android Dev Phones are not intended for
non-developer end-users. Because the
device can be configured with system
software not provided by or supported by
Google or any other company, end-users
operate these devices at their own risk.
Unknown Sources
Before you can download a web application you
must enable the Unknown sources feature (enables
downloading). Developers can use this option to
install non-Market applications.
1. Press and then tap
(
Settings
)
Applications
.
2. Tap
Unknown sources
to active this feature.
Note:
If you are notified that you can not download a
Market application because it comes from an
“Unknown source”, enabling this option
corrects this issue.
Managing Applications
This feature allows you to manage installed
applications. You can view and control currently
running services, or use the device for application
development.
You can also view the amount of memory or
resources used as well as the remaining memory
and resources for each of the applications on your
phone and clear the data, cache, or defaults.