Xantech MRC88 Stereo Amplifier User Manual


 
Model MRC88 Page: 85
© 2003 Xantech Corporation
2. Press the button for the zone to be unlinked. (Z1, Z2, etc) The keypad status LED’s will show ‘busy’
(rapid amber flash) for 10 seconds after the last button press, then ‘time out’ and return to normal
use mode (LED /green, LCD/normal display). The small ‘L’ will no longer appear. The zones will
resume independent control.
(EXPANDED)
Same as above, using the Status button in “Link Session” to access zones 9-16.