Sony STR-DN1030 Stereo Receiver User Manual


 
86
US
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF
04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm
masterpage: Left
STR-DN1030
4-420-297-14(1)
Depending on the settings, the receiver may not
turns on when “Pass Through” is set to “AUTO” or
“ON”.
Tip
You can also select a connected equipment, such as
Blu-ray Disc/DVD player from the TV menu. The
receiver and TV will automatically switch to the
appropriate HDMI input.
Enjoying the TV sound
from the speakers
connected to the receiver
(System Audio Control)
You can enjoy the TV sound from the speakers
connected to the receiver by a simple
operation.
You can operate System Audio Control
function using the TV menu. For details, refer
to the operating instructions of the TV.
You can also use the System Audio Control
function as follows.
If you turn on the receiver while the TV is
turned on, the System Audio Control
function will automatically activate to
output TV sound through the speakers
connected to the receiver. However, if you
turn off the receiver, the sound will output
from the TV speakers.
When you enjoy the TV sound from the
speakers connected to the receiver, you can
adjust the volume or turn off the sound
temporarily by using the TV’s remote
control.
Notes
If System Audio Control does not function
according to your TV setting, refer to the operating
instructions of the TV.
When “Ctrl for HDMI” is set to “ON”, the “Audio
Out” settings in the HDMI Settings menu will set
automatically based on the System Audio Control
settings (page 98).
Turning off the receiver
with the TV
(System Power-Off)
When you turn the TV off, using the power
button on the TV’s remote control, the receiver
and the connected equipment turn off
automatically.
You can also use the receiver’s remote control
to turn off the TV.
Press TV, then press AV ?/1.
The TV, receiver and the connected equipment
are turned off.
Notes
Set the TV power supply interlock function to on
before using the System Power-Off function. For
details, refer to the operating instructions of the
TV.
Depending on the condition of the connected
equipment, it may not be turned off. For details,
refer to the operating instructions of the connected
equipment.
If you use the System Power-Off function with a
non-Sony TV, program the remote control
according to the maker of the TV.
Sets System
Audio Control
to on
Turns on (if in
standby mode)
Switches to
appropriate
HDMI input
TV Receiver
Minimizes TV
volume
Outputs TV
sound
TV
AV ?/1