Sony STR-DN1030 Stereo Receiver User Manual


 
119
US
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF
04\4420297141_US\US07ADD_STR-DN1030-CEL.fm
masterpage: Right
STR-DN1030
4-420-297-14(1)
Additional Information
The sound is distorted.
Press MASTER VOL – or
2 – on the
remote control repeatedly.
Set the “EQ” setting of the iPod/iPhone to
“Off” or “Flat”.
There is no sound from the iPod/
iPhone.
Disconnect the iPod/iPhone and connect
the iPod/iPhone again.
The iPod/iPhone cannot be charged.
Check that the receiver is turned on.
Make sure the iPod/iPhone is connected
firmly.
The iPod/iPhone cannot be operated.
Check that you have removed the protect
case of the iPod/iPhone.
Depending on the contents of the iPod/
iPhone, it may take time to start playback.
Disconnect the iPod/iPhone and connect
the iPod/iPhone again.
You are using an unsupported iPod/
iPhone. See “Compatible iPod/iPhone
models” (page 52) for the supported
device types.
The ring volume of the iPhone does not
change.
Adjust the ring volume using the controls
on the iPhone.
Are you using a supported USB
device?
• If you connect an unsupported USB
device, the following problems may occur.
See “Compatible USB devices” (page 55)
for the supported device types.
The USB device is not recognized.
File or folder names are not displayed
on this receiver.
Playback is not possible.
The sound skips.
There is noise.
A distorted sound is output.
There is noise, skipping, or distorted
sound.
Turn off the receiver and reconnect the
USB device, then turn on the receiver.
The music data itself contains noise, or the
sound is distorted.
The USB device is not recognized.
• Turn off the receiver, then disconnect the
USB device. Turn on the receiver again
and reconnect the USB device.
• Connect the supported USB device
(page 55).
• The USB device does not work properly.
Refer to the USB device operating
instructions on how to deal with this
problem.
Playback does not start.
Turn off the receiver and reconnect the
USB device, then turn on the receiver.
• Connect the supported USB device
(page 55).
•Press N to start playback.
The USB device cannot be connected
into the (USB) port.
The USB device is being connected upside
down. Connect the USB device in the
correct orientation.
iPod/iPhone USB device
continued