Sony STR-DN1030 Stereo Receiver User Manual


 
128
US
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF
04\4420297141_US\US07ADD_STR-DN1030-CEL.fm
masterpage: Left
STR-DN1030
4-420-297-14(1)
iPod/iPhone section
DC 5V 1.0 A MAX
USB section
Supported bit rate* MP3 (MPEG 1 Audio
Layer-3):
32 kbps – 320 kbps, VBR
WMA: 48 kbps – 192 kbps
AAC: 48 kbps – 320 kbps
* Compatibility with all
encoding/writing
software, recording
devices and recording
media cannot be
guaranteed.
Transfer speed Full-speed
Supported USB device
Mass Storage Class
Maximum current 500 mA
NETWORK section
Ethernet LAN 10BASE-T/100BASE-TX
Wireless LAN
Compatible standards:
IEEE 802.11 b/g
Security: WEP 64 bit, WEP 128 bit,
WPA/WPA2-PSK (AES),
WPA/WPA2-PSK (TKIP)
Radio frequency: 2.4 GHz
Bluetooth section
Communication system
Bluetooth Specification
version 2.1 + EDR
(Enhanced Data Rate)
Output Bluetooth Specification
Power Class 2
Maximum communication range
Line of sight approx.
10 m
1)
Frequency band 2.4 GHz band
(2.4000 GHz – 2.4835 GHz)
Modulation method FHSS (Freq Hopping
Spread Spectrum)
Compatible Bluetooth profiles
2)
A2DP (Advanced Audio
Distribution Profile)
AVRCP 1.3 (Audio Video
Remote Control Profile)
Supported Codecs
3)
SBC
4)
Transmission range (A2DP)
20 Hz – 20,000 Hz
(Sampling frequency
44.1 kHz)
1)
The actual range will vary depending on factors
such as obstacles between devices, magnetic fields
around a microwave oven, static electricity,
cordless phone, reception sensitivity, antenna’s
performance, operating system, software
application, etc.
2)
Bluetooth standard profiles indicate the purpose of
Bluetooth communication between devices.
3)
Codec: Audio signal compression and conversion
format
4)
Subband Codec
General
Power requirements
Power consumption 240 W
Power consumption (during standby mode)
0.3 W (When Control for
HDMI, Network Standby,
and Bluetooth Standby are
set to off, and the receiver
in zone 2 is turned off.)
Dimensions (width/height/depth) (Approx.)
430 mm × 158 mm ×
322.6 mm (17 in ×
6 1/4 in × 12 3/4 in)
including projecting parts
and controls
Mass (Approx.) 8.8 kg (19 lb 7 oz)
Design and specifications are subject to
change without notice.
Area Power requirements
USA, Canada 120 V AC, 60 Hz
Mexico 127 V AC, 60 Hz
Brazil 127 V AC – 220 V AC,
60 Hz
Halogenated flame retardants are not used in
the certain printed wiring boards.