Sony STR-DN1030 Stereo Receiver User Manual


 
12
US
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF
04\4420297141_US\US03DES_STR-DN1030-CEL.fm
masterpage: Left
STR-DN1030
4-420-297-14(1)
* When playing a Dolby Digital or DTS format disc,
make sure that you have completed the digital
connections and that INPUT MODE is not set to
“ANALOG” (page 88) or “A. DIRECT” is not
selected.
P DTS(-ES) indicator*
Lights up the respective indicator when the
receiver is decoding the corresponding DTS
format signals.
DTS
DTS-ES
DTS 96/24
DTS
DTS-ES
DTS 96 kHz/24 bit
Q Tuning indicator
Lights up when the receiver tunes to a radio
station.
MEM
Memory function, such as Preset Memory
(page 60), etc., is activated.
ST
Stereo broadcast
R S.OPT.
Lights up when Sound Optimizer function is
activated (page 64).
S A.P.M.
Lights up when the A.P.M. (Automatic Phase
Matching) function is activated.
You can only set the A.P.M. function in the
DCAC (Digital Cinema Auto Calibration)
function (page 42).
T EQ
Lights up when the equalizer is activated.
U D.RANGE
Lights up when dynamic range compression is
activated (page 96).
V D.C.A.C.
Lights up when the measurement results of the
“Auto Calibration” function are applied.
W UPDATE
Lights up when a new software is available
(page 77).
X Dolby Pro Logic indicator
Lights up the respective indicator when the
receiver performs Dolby Pro Logic processing.
This matrix surround decoding technology can
enhance input signals.
PL
PL II
PL IIx
PL IIz
Dolby Pro Logic
Dolby Pro Logic II
Dolby Pro Logic IIx
Dolby Pro Logic IIz
Note
These indicators may not light up depending on
the speaker pattern setting.
Y
Lights up when the disc being played back
contains an LFE (Low Frequency Effect)
channel and the LFE channel signal is actually
being reproduced.
Z Playback channel indicator
The letters (L, C, R, etc.) indicate the channels
being played back. Based on the speaker
settings, the box around the letter(s) vary to
show how the receiver downmixes the source
sound.
LH
RH
L
R
C
SL
SR
S
SBL
SBR
SB
Front Left High
Front Right High
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround equipment
obtained by Pro Logic
processing)
Surround Back Left
Surround Back Right
Surround Back (the
surround back equipment
obtained by 6.1 channel
decoding)
Example:
Speaker pattern: 3/0.1
Recording format: 3/2.1
Sound Field: A.F.D. AUTO