Sony STR-DN1030 Stereo Receiver User Manual


 
51
US
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF
04\4420297141_US\US04GET_STR-DN1030-CEL.fm
masterpage: Right
STR-DN1030
4-420-297-14(1)
Basic Operations
3 Select the equipment you want,
then press .
The menu screen disappears and the
playback screen of the external input
appears.
The input that can be selected:
BD/DVD: Blu-ray Disc player or DVD
player, etc., connected to the BD/DVD
jack.
GAME: PlayStation 3, etc., connected
to the GAME jack.
SAT/CATV: Satellite tuner, etc.,
connected to the SAT/CATV jack.
VIDEO 1, VIDEO 2: VCR, etc.,
connected to the VIDEO 1 or VIDEO 2
jack.
TV: TV connected to the TV jack.
SA-CD/CD: Super Audio CD or CD
player, etc., connected to the SA-CD/
CD jack.
4 Turn on the equipment and
start playback.
5 Press MASTER VOL +/– or
2 +/– to adjust the volume.
You can also use MASTER VOLUME on
the receiver.
6 Press SOUND FIELD +/– to
enjoy the surround sound.
You can also use 2CH/A.DIRECT,
A.F.D., MOVIE (HD-D.C.S.) or MUSIC
on the receiver.
For details, see page 61.
Tips
You can turn INPUT SELECTOR on the receiver
or press input buttons on the remote control to
select the equipment you want.
You can adjust the volume differently using the
MASTER VOLUME knob on the receiver or the
MASTER VOL +/– or
2 +/– button on the
remote control.
To turn the volume up or down quickly
Turn the knob quickly.
Press and hold the button.
To make fine adjustment
Turn the knob slowly.
Press the button and release it immediately.
To activate the muting function
Press MUTING or .
The muting function will be canceled when
you do the following.
Press MUTING or again.
Change the volume.
Turn off the receiver.
Perform Auto Calibration.
To avoid damaging your
speakers
Before you turn off the receiver, be sure to turn
down the volume level.
You can enter a name of up to 8 characters for
inputs and display it.
It is more recognizable having the equipment
named on the display than the jacks.
1 Select the input you want to
name from “
Input” screen.
2 Press TOOLS/OPTIONS.
The option menu appears.
3 Select “Name Input”, then
press or b.
4 Press V/v repeatedly to select a
character, then press b.
You can move the input position
backward and forward by pressing B/b.
5 Repeat step 4 to input a
character one by one, then
press .
The name you entered is registered.
Note
Some letters that can be displayed on the TV screen
cannot be displayed on the display panel.
Naming the input (Name Input)