Filter
Top Products
93
Speaker System Set-Up Menu
“FRONT DIST” (front speaker distance)
Set the front speaker distance from your listening
position between 1.0 to 7.0 m in 0.2 m increments.
The default setting is “3.0
.”
“CEN DIST” (centre speaker distance)
Set the centre speaker distance between the
“FRONT DIST” setting and -1.6 m of the
“FRONT DIST” setting (set in 0.2 m increments).
The default setting is “3.0.”
“SURR DIST” (surround speaker distance)
Set the surround speaker distance between the
“FRONT DIST” setting and -4.6 m of the
“FRONT DIST” setting (set in 0.2 m increments).
The default setting is “3.0.”
Notes
• When you select an item, the sound momentarily cuts
off.
• Depending on the setting of other speakers, the
subwoofer sound may be excessive.
• If front and surround speakers are not placed at an
equal distance from your listening position, set the
distance according to the closest speaker.
• Do not place the surround speakers and the centre
speaker farther away from your listening position than
the front speakers.
• Depending on the input stream, the distance settings
may not be effective.
Speaker Level Settings
(“LEVEL”)
You can individually set the loudness of each
speaker. Use the test tone for easy adjustment (go
to “Setting the speaker level by using the test tone”
on page 94).
You can also adjust the levels without using the
test tone. Select “LEVEL” (level) in the AMP
menu. To use the AMP menu, see “Using the
AMP Menu” (page 91).
The default settings are underlined.
“TEST TONE”
“FL LEVEL” (front left speaker level)
Set the front left speaker level between –6 dB to 0
dB in 1 dB increments. The default setting is “0
.”
“CEN LEVEL” (centre speaker level)
Set the centre speaker level between –6 dB to +6
dB in 1 dB increments. The default setting is “0
.”
“FR LEVEL” (front right speaker level)
Set the front right speaker level between –6 dB to
0 dB in 1 dB increments. The default setting is
“0
.”
“SR LEVEL” (surround right speaker level)
Set the surround right speaker level between –6
dB to +6 dB in 1 dB increments. The default
setting is “0
.”
“SL LEVEL” (surround left speaker level)
Set the surround left speaker level between –6 dB
to +6 dB in 1 dB increments. The default setting is
“0
.”
“SW LEVEL” (subwoofer speaker level)
Set the subwoofer level between –6 dB to +6 dB
in 1 dB increments. The default setting is “0
.”
To adjust the volume of all the speakers at one
time
Press 2 +/– on the remote. Or press VOLUME +/
– on the centre unit.
1.0 - 7.0 m
0 - 7.0 m
“T. TONE OFF”
Emits no test tone.
“T. TONE ON” Emits test tone from the
speakers in turn.
,continued