Sony DAR-RD100 Stereo System User Manual


 
55
Playback
Note
The zoom function may not work depending on the disc.
To play repeatedly
Press REPEAT repeatedly to select an item to be
repeated.
[Chapter]: Repeats the current chapter. (DVD
only)
[Title]: Repeats the current title. (DVD only)
[Track]: Repeats the current track. (VIDEO CD
only)
[All]: Repeats all the tracks on the disc. (VIDEO
CD only)
[Off]: Does not play repeatedly.
Notes
For a VIDEO CD with PBC function, set [PBC] to
[Off] in [Settings] Setup (page 78).
If you press ./> (previous/next), x (stop), or
(instant replay) during Repeat Play, Repeat Play
is cancelled.
To repeat a specific portion (A-B)
You can play a specific portion of a title, chapter,
or track repeatedly.
1 During playback, when you find the starting
point (point A) of the portion to be repeated,
press A-B.
[A-] appears on the TV screen.
2 When you reach the ending point (point B),
press A-B again.
[A-B] appears and the recorder starts
repeating this specific portion.
To return to normal playback, press A-B to
select [Off].
Note
A-B Repeat Play may not work properly with some
Super VCDs.
To play in random order (VIDEO CD or Karaoke
DVD only)
Press RANDOM during playback. [RANDOM]
appears on the TV screen.
To return to normal playback, press RANDOM
again.
z Hint
To play another title in random order, press ./>.
Note
For a VIDEO CD with PBC function, set [PBC] to [Off]
in [Settings] Setup (page 78).
To watch TV in the sub picture during playback
(Picture-in-Picture)
You can view a TV programme in the sub picture
while playing a disc.
Press (Picture-in-Picture) during playback to
turn on the sub picture on the TV screen.
To change the programme position or input source
for the sub picture, press PROG +/– or INPUT
SELECT.
To change the sub picture position, press </,.
Each press moves the sub picture clockwise or
counterclockwise.
To turn off the sub picture, press again.
z Hint
If you watch TV in full screen, press x to stop playback.
Notes on the recorder’s surround function
The SUR button on the remote works for LINE
1- TV jack, LINE 2 OUT (AUDIO L/R) jack,
and LINE 3/DECODER jack output only. To
enjoy the surround effects of the speaker system,
see page 85.
• The function may not work with some discs.
• When you turn on this function, turn off the
surround settings of the connected TV or
amplifier (receiver).
• Make sure that your listening position is between
and at an equal distance from your speakers, and
that the speakers are located in similar
surroundings.
Note on playing DTS sound tracks on a CD
When playing DTS-encoded CDs, excessive noise
will be heard from the LINE output stereo jacks.
To avoid possible damage to the audio system, the
consumer should take proper precautions when
the LINE output stereo jacks of the recorder are
connected to an amplification system. To enjoy
,continued