Filter
Top Products
104
, Multilingual subtitles are not recorded on the
DVD VIDEO.
, The DVD VIDEO prohibits changing of the
subtitles.
, Try changing the subtitle using the DVD
VIDEO’s menu.
, The subtitles cannot be changed for the titles
recorded using this recorder.
The angles cannot be changed.
, Multi-angles are not recorded on the DVD
VIDEO being played.
, You are trying to change the angles when “ ”
does not appear in the front panel display
(page 53).
, The DVD VIDEO prohibits changing angles.
, Try changing the angle using the DVD VIDEO’s
menu.
, The angles cannot be changed for the titles
recorded on this recorder.
The MP3 audio tracks or JPEG image files do
not play.
, The MP3 audio tracks or JPEG image files are
not recorded in a format that the recorder can
play (page 10).
Recording/Timer recording/Editing
The programme position cannot be changed
from the channel you are recording.
, Set the TV’s input source to “TV.”
Recording does not start immediately after you
press z REC.
, Operate the recorder only after “LOADING,”
“INITIALIZE,” or “WRITE DISC” disappears
on the front panel display.
Nothing was recorded even though you set the
timer setting correctly.
, The recorder was already turned on at the timer
recording start time. Set the recorder to standby
mode before timer recording starts.
, There was a power failure during recording.
, The recorder’s internal clock stopped due to a
power failure. Reset the clock (page 77).
, The channel was disabled after the timer
recording was set. See [Channel Settings] on
page 75.
, Disconnect the mains lead from the mains, and
connect it again.
, The programme contains copy protection signals
that restrict copying.
, Another timer setting overlapped the timer
setting (page 46).
, There is no recordable disc inserted in the
recorder.
, There is not enough disc space for the recording.
, The disc is protected (DVD+RW, DVD-RW,
DVD+R) (page 39).
, The recorder was in the process of DV Dubbing
(page 70).
Recording does not stop immediately after you
press x.
, It will take a few seconds for the recorder to input
disc data before recording can stop.
Timer recording is not complete or did not start
from the beginning.
, There was a power failure before or during
recording. Reset the clock (page 77).
, Another timer setting overlapped the timer
setting (page 46).
, There is not enough disc space for the recording.
, The PDC/VPS function is working (page 43).
Contents previously recorded were erased.
, Data that has been recorded on a DVD with a PC
will be erased from the disc when the disc is
inserted.
The PDC/VPS function does not operate.
, Check that the clock and date are set correctly.
, Check that the PDC/VPS time you set is the
correct one (there might be a mistake in the TV
programme guide). If the broadcast you wanted
to record did not send accurate PDC/VPS
information, the recorder will not start recording.
, If the reception is poor, the PDC/VPS signal
might be altered and the recorder might not start
recording.
, [PDC/VPS] is set to [Off] (page 43).
Display
The clock has stopped.
, Set the clock again (page 77).
, The clock stopped due to a power failure. Reset
the clock (page 77).
The TIMER REC indicator is flashing.
, The disc does not have enough space.