Filter
Top Products
31
DVD Recorder Basics
DVD Recorder Basics
Inserting and Formatting a
Disc
When you first insert a new disc, the recorder will
ask you to format the disc. Follow the steps below
to format the disc. You can also reformat a
DVD+RW or DVD-RW to create a blank disc.
1 Turn on the TV.
2 Press DVD &/1.
The recorder turns on.
3 Switch the input selector on your TV so that
the signal from the recorder appears on the
TV screen.
4 Set the AMP/DVD switch to DVD.
5 Press Z (open/close), and place a disc on
the disc tray.
6 Press Z (open/close) to close the disc
tray.
After “LOADING” disappears from the front
panel display, the display asks for
confirmation.
7 Press < to select [OK] and press ENTER.
The recorder starts formatting the disc.
The display shows the approximate time
required.
8 Press ENTER when [OK] appears.
• For a DVD-RW, the recorder automatically
formats in VR mode. To format in Video
mode, see “Reformatting a disc” below.
z Hint
For a formatted disc, you can use the disc after
“LOADING” disappears from the front panel display in
step 6 above.
Reformatting a disc
You can erase all contents of a disc to create a
blank disc. To format a new DVD-RW in Video
mode, reformat the disc.
1 Insert a disc.
2 Set the AMP/DVD switch to DVD, and press
SET UP to turn on the Setup Display.
3 Select [Disc Info] and press ,.
4 Select [Format DVD] and press ,.
+
R
-
RWVR
-
RW
Video
+
RW
-
R
AMP/DVD switch
DVD "/1
Z
1 2 3
4 6
7 8 9
0
5
</M/m/,,
ENTER
SET UP
Labelled side facing up
+
RW
-
RWVR
-
RW
Video
Format DVD
Disc Info
Finalize
Disc Name
Protect
Start
,continued