Filter
Top Products
Setting up the receiver
07
42
En
Surround back speaker distance
setting
(page 45)
Specifies the distance from your listening
position to your surround back speakers.
Surround left speaker distance setting
(page 45)
Specify the distance from your listening
position to your surround left speaker.
Subwoofer distance setting
(page 45)
Specify the distance from your listening
position to your subwoofer.
Dynamic range control setting
(page 46)
Compress the dynamic range of the
sound track.
Dual mono setting
(page 46)
Isolate one channel when listening to
discs with dual mono encoding.
Component video input settings
(page 46)
Specify the components to be assigned to
the component video inputs (below).
• Component video 1 input setting
• Component video 2 input setting
Digital input settings
(page 46)
Specify the components to be assigned to
the digital inputs (below).
• Coaxial digital input 1 setting
• Coaxial digital input 2 setting
• Optical digital input 1 setting
• Optical digital input 2 setting
(VSX-
D814 only)
SR+ control settings
(page 47)
Specify how you want to control your
Pioneer plasma display.
• Control mode setting
• Volume control setting
• Function setting for
DVD
input
• Function setting for
TV
input
• Function setting for
DVR
input
• Function setting for
VIDEO
input
4 Use
or
to adjust the setting.
The setting is entered automatically.
5 Repeat steps 3 and 4 to adjust other
setup options.
6 When you’re done, press ENTER to
exit.
• The setting display is automatically exited
after 3 minutes of inactivity.
Speaker setting
• Default setting:
FL-CS-SS
(If a subwoofer
is detected when you turn the receiver on,
the default is
FS-CS-SS
.)
You must let the receiver know how many
speakers you have, and how big they are. The
size you choose (large or small) determines
how much bass is sent from the receiver to
the speakers.
In the display,
F
,
C
, and
S
refer to front, center,
and surround speakers respectively. Speaker
size is denoted as
L
for large speakers,
S
for
small speakers, and (asterisk) if no speaker
is connected.
• If the cone size (diameter) of the speaker
is larger than 15 cm, set the speaker size
to
L
.
• If you’re not using a subwoofer, we
recommend setting the front speakers to
L
.
VSX_714_814.fm 42 ページ ２００４年１月２８日 水曜日 午前１０時１８分