Filter
Top Products
Controls and displays
05
33
En
English Italiano Français
Nederlands
EspañolDeutsch
SLEEP
Use to put the receiver in sleep mode and
select the amount of time before the
receiver turns off.
6
(TUNE +/–
,
ST +/–) /ENTER
Use the arrow buttons when setting up
your surround sound system (see
page 41). Also used to control DVD
menus/options and for deck 1 of a double
cassette deck player. Use the
TUNE +/–
buttons to find radio frequencies and use
ST +/–
to find preset stations (page 54).
7 Component/Tuner control buttons
The main buttons (
,
, etc.) are used to
control a component after you have selected
it using the
MULTI CONTROL
buttons. The
tuner/DTV controls above these buttons can
be accessed after you have selected the
corresponding
MULTI CONTROL
button
(
TUNER
or
TV/SAT
(when connected to
DTV)).
RETURN
Returns to the last screen selected when
using a digital TV tuner.
BAND
Switches between the tuner AM and FM
bands
(page 52).
DISPLAY
Use to switch the display between the
station preset name and the frequency for
the tuner. Also displays the different types
of RDS information available.
CLASS
Switches between the three banks
(classes) of radio station presets
(page 53).
MPX
Switches between stereo and mono
reception of FM broadcasts. If the signal
is weak then switching to mono will
improve the sound quality
(page 52).
D.ACCESS
After pressing, you can access a radio
station directly using the number buttons
(page 52).
8 Number buttons
Use the number buttons to directly select a
radio frequency (page 52) or the tracks on a
CD, DVD, etc.
9 CHANNEL +/–
Use to select channels when using a VCR,
DVR, etc.
10 INPUT SELECT
Use to select the input source.
11 LED
This lights when a command is sent from the
remote control.
12 SOURCE
Press to turn on/off other components
connected to the receiver.
13 DISC (ENTER)
The button’s use depends on the component
selected. It can be used to enter commands
for TV or DTV, and can also be used to select
a disc in a multi-CD player.
14 TV CONTROL buttons
These buttons are dedicated to control the TV
assigned to the
TV CONT
button. Thus if you
only have one TV to hook up to this system
assign it to the
TV CONT MULTI CONTROL
button. If you have two TVs, assign the main
TV to the
TV CONT
button.
Use to turn on/off the power of the TV.
(TV CONTROL) INPUT SELECT
Use select the TV function.
CHANNEL +/–
Use to select channels.
VOLUME +/–
Use to adjust the volume on your TV.
VSX_714_814.fm 33 ページ ２００４年１月２８日 水曜日 午前１０時１８分