Filter
Top Products
Setting up the receiver
07
43
En
English Italiano Français
Nederlands
EspañolDeutsch
• Cycle through the available choices
using
or
and choose a configuration
that matches your speaker setup.
One of the following configurations should
match your setup:
Surround back speaker setting
• Default setting:
S
(VSX-D814), (VSX-
D714)
You must let the receiver know if surround
back speaker(s) have been connected, and
how big they are. The size you choose (large or
small) determines how much bass is sent
from the receiver to the speakers. If you have
connected a subwoofer to the surround back
terminals (VSX-D814 only), you should select
the surround back subwoofer setting (
SB SW
)
from the options. Choose (asterisk) if no
speaker is connected.
• Use
or
to select SB S, SB , SB SW
or SB L.
* VSX-D814 only
• To select
SB L
, you must have
SL
selected
in the
Speaker setting
.
Subwoofer setting
You can choose whether the subwoofer is
used or not. Use the plus (
PLUS
) setting for
extra bass.
• Use
or
to select subwoofer YES,
PLUS or NO.
•
YES
– The LFE channel and bass frequen-
cies from the small (
S
) speakers are sent
to the subwoofer.
•
PLUS
– The LFE channel and bass
frequencies from all speakers are sent to
the subwoofer (
L
speakers will also output
bass).
•
NO
– No bass frequencies are sent to the
subwoofer.
• If you chose the small front speaker
setting,
SW YES
is automatically set and
locked.
FL-CL-SL
FL-CL-SS
FL-CL-S
FL-CS-SL
FL-CS-SS
FS-C -SS
FS-CS-S
FS-CS-SS
FL-C -SS
FL-C -SL
FL-CS-S
FL-C -S
FS-C -S
SB S SB
SB SW*
SB L
VSX_714_814.fm 43 ページ ２００４年１月２８日 水曜日 午前１０時１８分