Filter
Top Products
Controls and displays
05
30
En
Display
1 SIGNAL SELECT indicators
Lights to indicate the type of input signal
assigned for the current component:
AUTO
Lights when
AUTO
signal select is on.
SB
Depending on the source, this lights
when a signal with surround back
channel encoding is detected.
DIGITAL
Lights when a digital audio signal is
detected.
2
DIGITAL
Lights when a Dolby Digital encoded
signal is detected.
ANALOG
Lights when an analog signal is detected.
DTS
Lights when a source with DTS encoded
audio signals is detected.
2
When the
STANDARD
mode of the receiver is
on, this lights to indicate decoding of a DTS
signal.
3
2
DIGITAL
When the
STANDARD
mode of the receiver is
on, this lights to indicate decoding of a Dolby
Digital signal.
4
2
PRO LOGIC II
(
x
)
When the (
STANDARD
) Pro Logic II mode of
the receiver is on, this lights to indicate Pro
Logic II decoding. The
x
lights to indicate Pro
Logic IIx decoding (see
Listening in surround
sound
on page 34 for more on this).
5 VIR.SB
Lights during Virtual surround back
processing.
6 DIRECT
Lights when source direct playback is in use.
Direct playback bypasses the tone controls
and channel levels for the most accurate
reproduction of a source.
7 MIDNIGHT
Lights during Midnight listening.
8 SLEEP
Lights when the receiver is in sleep mode.
9 ATT
Lights when
INPUT ATT
is used to attenuate
(reduce) the level of the analog input signal.
10 Speaker indicator
Shows the speaker system currently in use.
EON
SP A B
RDS
x
123456 1
3
78 9 11 1210
14
1917
16
15 18
VSX_714_814.fm 30 ページ ２００４年１月２８日 水曜日 午前１０時１８分