Filter
Top Products
Listening to your system
06
37
En
English Italiano Français
Nederlands
EspañolDeutsch
Using the Surround Back
Channel (SB CH)
• Default setting:
SB ON
(VSX-D814),
SB
OFF
(VSX-D714)
You can use automatic 6.1 decoding for 6.1
encoded sources (for example, Dolby Digital
EX or DTS-ES), or you can choose to always
use 6.1 decoding with other sources (for
example, 5.1 encoded material). With 5.1
encoded sources, a surround back channel
will be generated, but the material may sound
better in the 5.1 format for which it was origi-
nally encoded, in which case you can simply
switch the surround back channel off. The
table below indicates when you will hear the
surround back channel.
• Press SB CH MODE (front panel)
repeatedly to cycle the surround back
channel options.
Each press cycles through the options as
follows:
•
SB CH AUTO
– Automatically switches to
6.1 decoding for 6.1 encoded sources (for
example, Dolby Digital EX or DTS-ES)
•
SB CH ON
– 6.1 encoding is always used
(for example, on 5.1 encoded material)
•
SB CH OFF
– Surround back channel is
switched off
• You can’t use the surround back channel
with headphones, the
STEREO
/
DIRECT
mode, or if the
Surround back speaker
setting
on page 43 is set to
SB
or (VSX-
D814 only)
SB SW
.
• You can’t hear the surround back channel
with DTS 96kHz/24 bit sources.
ON
AUTO
ON
AUTO
ON
AUTO
ON
AUTO
DTS-ES/Dolby Digital
Matrix encoded
multi-channel sources
with 6.1 surround
Dolby Digital/DTS
encoded multi-channel
sources
Dolby Digital/DTS
encoded stereo sources,
Stereo sources
Analog 2-channel
(stereo) source
(Dolby Digital)
PRO LOGIC IIx
MOVIE/MUSIC
STANDARD
decoding
All modes
STANDARD
ADVANCED SURROUND
SB CH
MODE
NEO:6 CINEMA/
NEO:6 MUSIC
Type of source
VSX_714_814.fm 37 ページ ２００４年１月２８日 水曜日 午前１０時１８分