Filter
Top Products
Listening to your system
06
34
En
Chapter 6:
Listening to your system
Listening in surround sound
Using this receiver, you can listen to any
source in surround sound. However, the
options available will depend on your speaker
setup and the type of source you’re listening
to.
If you connected surround back speakers, see
also
Using the Surround Back Channel (SB
CH)
on page 37.
• While listening to a source, press
STANDARD.
If the source is Dolby Digital, DTS, or Dolby
Surround encoded, the proper decoding
format will automatically be selected and
shows in the display.
With two channel sources
, press
STANDARD
repeatedly to select from:
•
2
Pro Logic IIx MOVIE
– Up to 6.1
channel sound, especially suited to movie
sources
•
2
Pro Logic IIx MUSIC
– Up to 6.1
channel sound, especially suited to music
sources
•
2
PRO LOGIC
– 5.1 channel surround
sound
•
NEO:6 CINEMA
– 6.1 channel sound,
especially suited to movie sources
•
NEO:6 MUSIC
– 6.1 channel sound, espe-
cially suited to music sources
• You can’t use the
STANDARD
mode with
96kHz PCM or DTS 96kHz/24-bit stereo
sources.
• During playback of a Dolby Digital multi-
channel source with the
SB CH MODE
switched
ON
, you will only be able to
select
DOLBY EX
or
2
Pro Logic IIx
MUSIC
. See
Using the Surround Back
Channel (SB CH)
on page 37 for more on
this.
Using the Advanced surround effects
The Advanced surround effects can be used
for a variety of additional surround sound
effects. Most Advanced Surround modes are
designed to be used with film soundtracks,
but some modes are also suited for music
sources. Try different settings with various
soundtracks to see which you like.
STANDARD
ADVANCED
SURROUND
VSX_714_814.fm 34 ページ ２００４年１月２８日 水曜日 午前１０時１８分