Filter
Top Products
CLD-V2600 / 2400 Level I & III • Chapter Three
CLD-V2600 / 2400 Level I & III User’s Manual TP 117 v. 2.0 • 12/93 3-5
LaserDisc
VIDEO DISC PLAYER
REMOTE CONTROL UNIT CU-V113
REJECT
PLAY
PAUSE
REPEAT
MODE
STILL / STEP
REV FWD
DISP
SCAN
REV FWD
AUDIO
SPEED
DOWN UP
CLEAR
MULTI
REV FWD
7
98
4 65
1
32
0
CHAP/
FRAME
TRACK/
TIME
SEARCH
Figure 3-C
See Section 3.2.2, beginning on page 3-6,
for details about the use of each specific
remote control button.
CU-V113 / RU-V103 Remote Control:
REJECT: Ceases playback and spins-down the disc.
PAUSE: Ceases playback and displays a squelch screen.
Press any motion button to resume.
PLAY: Begins playing a disc, or resumes play.
REPEAT MODE: This button can be pressed to set side
repeat, chapter or track repeat, or auto-return.
STILL / STEP (FWD / REVERSE): Press either of these
buttons to produce a still video image (CAV Only).
Additional presses of the STEP FWD button moves the
image forward one frame at a time. STEP REV moves the
image in reverse one frame at a time.
DISP: Displays or removes the display of current
chapter/frame/track or time numbers on the screen.
During CD playback, track numbers with the disc’s
absolute time location are displayed or track and index
numbers are displayed with the elapsed time of the
current track.
SCAN (FWD / REVERSE): Press either of these buttons
to move quickly forward or backward through the
program material on a disc. Rapid scanning continues as
long as the button is depressed.
AUDIO: Press this button to select audio output: Digital
Stereo, Digital 1/L, Digital 2/R, Audio OFF, Analog
Stereo, Analog 1/L, Analog 2/R, Audio OFF. Note: CDs
output digital audio only.
SPEED (DOWN / UP): Press these buttons to set the
speed at which multi-speed play will occur. (CAV only.)
CLEAR: Press this button to CLEAR erroneous inputs or
to stop a Search operation.
MULTI-SPEED (REV / FWD): Press this button to
initiate Multi-Speed Play forward or reverse in the speed
that has been set with the SPEED button. (CAV only.)
NUMERIC BUTTONS (0-9): Use these buttons to enter
search points on a disc. Use the CHAP/FRAME
TRACK/TIME button to set an “address flag”, indicating
chapter, frame or time number (LD) or track or time
number (CD) . Then enter the numeric digits for the
location and press Search or Play. Digits 1-9 can also be
used for viewer responses during Level III program
execution. See Level III Command Input Number Wait (?N).
SEARCH: First set the “address flag” using the CHAP/
FRAME TRACK/TIME button. Then specify the number to
be searched to by using the digit buttons. Press the
SEARCH button to execute. After searching, the player
presents a still frame on CAV discs or immediately plays
on CLV discs or CDs.
CHAP / FRAME TRACK / TIME: Press this button to
set the address flag, indicating how a search will be
performed, either by chapter or frame number (CAV), or
chapter or time number (CLV) or Track, Time (CD).
LEVEL I CONTROL
Note: The CU-V113 & RU-V103 remote control units are not packaged with a cable for connection to the BC Terminal on the front
of the player. A stereo or mono mini-plug cable can be purchased separately, however, and used to provide the wired connection.