Filter
Top Products
4.7.5 Communication Control Commands
43)
COMMUNICATION CONTROL
LD/CD
Function: Communication mode is selected.
Format: Integer C M
Explanation: Contents of the communication control register (CCR) are
rewritten. For the CLD-V2600 and the CLD-V2400, the
Automatic Status can be selected ON or OFF. When Automatic
Status is ON the Player returns an “R” upon execution of a
command, when it is OFF, it does not.
The initial value (default value) of the CCR is set to Mode 3. With
this command, it is possible to change the communication mode
as required. If an unsupported mode is specified, an error occurs.
Execution: * CCR = 3 Player’s set to CCR Mode 3; no ‘“R” is returned
2 C M <C/R> (Note: No “R” is returned here, as player is in
currently in CCR Mode 3.)
* CCR = 2 Player is in CCR Mode 2, “R” is returned
3 C M <C/R> R <C/R> (Note: “R” is returned, as player is
in CCR Mode 2.)
* CCR = 3 Player is in CCR Mode 3, no ‘“R” returned
44)
CCR MODE REQUEST
LD/CD
Function: Current communication mode is returned.
Format: ? M
Explanation: Contents of the communication control register (CCR) are
returned, indicating the current communication mode.
Execution: * CCR = 3
? M <C/R> CM3 <C/R>
Chapter Four • CLD-V2600 / 2400 Level I & III
4-38
TP 117 v. 2.0 • 12/93 CLD-V2600 / 2400 Level I & III User’s Manual
Integer Mode Auto-Status
2 MODE-2 OFF — “R” not returned
3 MODE-3 ON — “R” returned
CM2 MODE-2
CM3 MODE-3