Filter
Top Products
CLV Display
When a CLV disc is playing, the player cannot perform certain CAV special effects
commands such as STILL/STEP or MULTI-SPEED SET or MULTI-SPEED. If these
buttons are pressed on the remote control unit during CLV play, the letters CLV
will appear in Area 2, the upper right hand corner of the monitor, indicating that a
CLV disc is playing and that certain commands (STILL/STEP FORWARD, MULTI-
SPEED, etc.) are unavailable. The commands are also unavailable if a CD is
playing, but no indicator will appear on the monitor.
2.5.3 Area 3: Argument Display
An “argument” displayed in Manual Mode is the numeric information preceding a
search or play command that provides the player with the exact location (address)
on the disc to search or play. It is displayed in the upper left corner of the video
screen on the second display line (Line 1) after a search flag has been set by
pressing the Chapter/Frame Track/Time button on the remote control, and after
the numeric keys and then the SEARCH or PLAY button on the remote control are
pressed (e.g. Frame Mode, 1000 SEARCH or Track Mode, 2 PLAY).
The numbers are displayed according to the type of address flag that has been set:
Chapter, Frame, Track or Time. (See Figure 2-R - 2-T) The CLD-V2600 & the
CLD-V2400 players search or play to frame numbers on a CAV disc; to chapter
numbers on a CAV or CLV disc that has chapters encoded on the disc; to time
numbers on a CLV disc; and to track, or time numbers on a CD. The default setting
is Chapter Search on LDs and Track Search on CDs.
2.5.4 Area 3: Address Flag Display
The proper address flag must be set to send the correct
“
address” to the player. The
address flag indicates the location to which the player will Search or Play. The Search
address is displayed on the monitor according to the address flag that has been set.
On the CU-V113 and the RU-V103, the button labeled CHAP/FRAME/TRACK/TIME
is used to select the address flag (chapter, frame or time number for LaserDiscs, or
track, or time for CDs). After the address flag is selected, send the location to which
the player will search or play. (For more information, see Section 3.2.2, #12 Search
on page 3-12 and #13 Chapter/Frame/Track/Time, on page 3-13.)
NOTE: The Chapter/Frame/Track or Time number address flag must be set before a
Search or Play command is sent from a computer. Neither the address flag, nor the
characters of an address will be displayed on the video screen during a computer
transmitted Search or Play. See Section 4.5 on page 4-7 & 4-8 for more information
on Level III Command Formats. For specific Level III Player Control Commands used
to set the desired search flag, see Section 4.7 on page 4-21 to 4-23. Notice, it is
possible to set address flags for Index and Block levels under computer control.
CLD-V2600 / 2400 Level I & III User’s Manual TP 117 v. 2.0 • 12/93 2-19
CLD-V2600 / 2400 Level I & III • Chapter Two