Pioneer CLD-V2400 CD Player User Manual


 
Speed Status
To set the playback speed of the player, press MULTI-SPEED SET (“Up” or “Down” on
the remote control unit). The speed setting will be displayed in the upper right corner
of the monitor on the first display line (display line 0). See the example below in
Figure 2-W. The display in this example indicates the speed of the player in Multi-
Speed will be 1/4 speed. During Multi-Speed playback, audio is muted.
CLD-V2600 / 2400 Level I & III User’s Manual TP 117 v. 2.0 12/93 2-17
CLD-V2600 / 2400 Level I & III Chapter Two
1/4
NOTE: MULTI-SPEED SET is not available on this player
with CLV LaserDiscs or with CDs. If there is a CLV disc
in the drawer when the MULTI-SPEED SET button is
pressed, the letters CLV appear in the upper right hand
corner of the monitor, and no speed change is set. If
there is a CD in the drawer when the MULTI-SPEED SET
button is pressed, the player does not respond.
The table below shows the speeds as they are
displayed and corresponding speeds. (See Figure 2-X.)
Figure 2-W
Displayed Code Speed Set
x3 180 / 60 3x normal speed
x2 120 / 60 2x normal speed
x1 60 / 60 normal speed/default
*
1 / 2 30 / 60 1/2 x normal speed
1 / 4 15 / 60 1/4 x normal speed
1 / 8 8 / 60 1/8 x normal speed
1 / 16 4 / 60 1/16 time normal speed
STEP 1 2 / 60 1 frame per second
STEP 3 1 / 60 1 frame every 3 seconds
Figure 2-X
*
Normal /Default Speed is 30 frames per second.