Pioneer CLD-V2400 CD Player User Manual


 
CLD-V2600 / 2400 Level I & III User’s Manual TP 117 v. 2.0 12/93 2-5
CLD-V2600 / 2400 Level I & III Chapter Two
2 3 4
5
6
7
8
9
10
11
15
1413
12
1
1
2
DISC TRAY: Press the STOP OPEN /CLOSE
button to open the door and eject the tray.
STOP OPEN CLOSE BUTTON: Press this
button to open and close the disc tray.
Place a disc on the disc tray then press this
button to retract the disc tray into the
player. Press this button while a disc is
playing to stop playback. Press it again to
eject the tray.
PAUSE BUTTON: Press this button to stop
playback temporarily. To resume
playback, press the PLAY button.
PLAY BUTTON: Press this button to start
playback or to resume ordinary playback
from a still image or from pause mode.
POWER BUTTON: Press this button to
turn the power ON and OFF.
HEADPHONE JACK & VOLUME CONTROL:
Plug a headphone set into this jack, use the
“LEVEL” knob to control the volume.
REMOTE SENSOR: Infrared commands
from the remote control unit or from a wire-
less LaserBarcode reader are received here.
STANDBY INDICATOR: This indicator
lights up when the power is off.
BARCODE JACK: Connect a Pioneer
LaserBarcode Reader (UC-V108BC or
UC-V109BC) via this jack.
DISPLAY WINDOW INDICATORS: See page
2-4 for details.
KEY LOCK INDICATOR: This indicator lights up
when the Key Lock command is sent from a com-
puter or external control unit. When it is lit, front
panel buttons other than the power switch are
disabled. Also, signals from a remote control unit
or optional LaserBarcode reader are not accepted.
DISPLAY BUTTON: Pressing this button
displays the chapter (CAV or CLV), track (CD
Audio), frame (CAV) or time number (CLV or CD
Audio) on the TV screen or video monitor.
Pressing it again removes the numbers from
display. NOTE: With CDs, the track, index and
elapsed time will be displayed when this button
is pressed while the absolute time is displayed.
STILL / STEP BUTTONS: Press either of these
buttons to produce a still video image. Pressing the
STEP FWD button again moves the image forward
one frame at a time. STEP REV presents each
preceding frame. (CAV discs only. These buttons do
not function with CLV discs.)
SKIP BUTTONS: Press the SKIP FWD button to
advance to the next chapter or track and start
playback. Press the SKIP REV button once to
return the player to the beginning of the current
chapter or track. Pressing this button several
times before pictures or audio is played, will search
back a corresponding number of chapters or tracks.
SCAN CONTROL: Rotate the SCAN CONTROL dial
to advance or reverse playback rapidly. On CLV
discs, slightly rotate the dial for a clear picture
scan. Rotate the dial further for a normal CLV
Scan. On CAV discs, rotate the dial slightly to play
back the disc at 9x normal speed. Rotate fully to
play back at 32x normal speed. Both CAV scan
speeds present clear picture scan. (See page 3-3.)
3
6
5
4
11
10
9
8
7
15
14
13
12
CLD-V2600 Front Panel View
Figure 2-D