Filter
Top Products
CLD-V2600/2400 Remote Control Unit
CU-V113 & RU-V103
CU-V113 & RU-V103 Remote Control:
REJECT:
Ceases playback and spins-down the disc.
PAUSE: Ceases playback and displays a squelch
screen. Press any motion button to resume.
PLAY: Begins playing a disc, or resumes play.
REPEAT MODE: This button can be pressed to set
side repeat; or chapter or track repeat, or auto-return.
STILL / STEP (FWD / REVERSE): Press either of
these buttons to produce a still video image (CAV Only).
Additional presses of the STEP FWD button moves the
image forward one frame at a time. STEP REV moves
the image in reverse one frame at a time.
DISP: Displays or removes the display of current
chapter/frame/track or time numbers on the screen.
During CD playback, track and index numbers are
displayed with the elapsed time or track numbers with
the disc’s absolute time location are displayed.
SCAN (FWD / REVERSE): Press either of these
buttons to move quickly forward or backward through
the program material on a disc. Rapid scanning
continues as long as the button is depressed.
AUDIO: Press this button to select audio output:
Digital Stereo, Digital 1/L, Digital 2/R, Audio OFF,
Analog Stereo, Analog 1/L, Analog 2/R, Audio OFF.
Note: CDs output digital audio only.
SPEED (DOWN / UP): Press these buttons to set the
speed at which multi-speed play will occur. (CAV only.)
CLEAR: Press this button to CLEAR erroneous inputs
or to stop a Search operation.
MULTI-SPEED (REV / FWD): Press this button to
initiate Multi-Speed Play forward or reverse in the speed
that has been set with the SPEED button. (CAV only.)
NUMERIC BUTTONS (0-9): Use these buttons to
enter search points on a disc. Use the CHAP/FRAME
TRACK/TIME button to set an “address flag”,
indicating chapter, frame or time number (LD) or track
or time number (CD). Then enter the numeric digits for
the location and press Search or Play. Digits 1-9 can
also be used for viewer responses during Level III
program execution. See Level III Command Input
Number Wait (?N).
SEARCH: First set the “address flag” using the CHAP/
FRAME TRACK/TIME button. Then specify the number
LEVEL I CONTROL
to be searched to by using the digit buttons. Press the
SEARCH button to execute. After searching, the player
presents a still frame on CAV discs or immediately plays
on CLV discs or CDs.
CHAP / FRAME TRACK / TIME: Press this button to
set the address flag, indicating how a search will be
performed, either by chapter or frame number (CAV),
chapter or time number (CLV), track or time number (CD).
See
Section 3.2.2, beginning on page 3-4 and
continued on page 3-6, for details about the use
of each specific remote control button.
The CU-V113 & RU-V103 Remote Control
Appendix B
CLD-V2600/2400 Remote Control Units
TP 117 v. 2.0 • 12/93
B-1
Note: The CU-V113 / RU-V103 remote control units are not packaged with a cable for connection to the Barcode Terminal on the
front of the player. A stereo or mono mini-plug cable can be purchased separately, however, and used to provide the wired connection.
LaserDisc
VIDEO DISC PLAYER
REMOTE CONTROL UNIT CU-V113
REJECT
PLAY
PAUSE
REPEAT
MODE
STILL / STEP
REV FWD
DISP
SCAN
REV FWD
AUDIO
SPEED
DOWN UP
CLEAR
MULTI
REV FWD
7
98
4 65
1
32
0
CHAP/
FRAME
TRACK/
TIME
SEARCH