Pioneer CLD-V2400 CD Player User Manual


 
5)
PLAY
LD/CD
Function: Pictures and sound are reproduced.
Format: (Address) P L
Explanation: 1) If this command is sent when the player is in Random Access
Mode, video and audio are played at normal speed. Play Mode is
the only mode in which sound is automatically reproduced with
video on LaserDiscs.
2) If an address is specified, the player will play to that address
and stop automatically. The specified address is written in the
Mark Frame/Time/Block, or Mark Chapter/Track Register and
compared with the current address. When both values are equal,
Still Mode (CAV) or Pause Mode (CLV, CDs) occurs; then the
completion status is returned. Command completion also occurs
when lead-out is found before the specified address is reached.
3) If this command is sent when the player is in Park or Spin-Up
Mode, it is executed and the disc plays from the beginning of the
program area. Once playback begins, the completion status is
returned. Playback continues until another motion command is
received.
Execution #1: * Park, Spin Up or Pause Mode (CLV or CAV) or Still Mode (CAV)
(LDs) P L <C/R> R <C/R>
* Play Mode
Execution #2: * Spin Up, Still or Pause Mode (CAV)
(LDs-CAV) F R 3 2 4 0 0 P L <C/R>
* Plays to Frame 32400 and enters Still Mode R <C/R>
Execution #3: * Spin Up or Pause Mode (CLV)
(LDs- CLV) T M 2 0 2 8 P L <C/R>
* Plays to 20 minutes 28 sec. and enters Pause Mode R <C/R>
CLD-V2600 / 2400 Level I & III Chapter Four
IMPORTANT NOTE
When using the PLAY command with an address, the auto stop function will be released if
any other command, including a status request, is sent to the player before the specified
address is reached.
Use the Stop Marker command to achieve an auto stop PLAY function that will allow for
status requests and maintain the end address marker.
CLD-V2600 / 2400 Level I & III User’s Manual TP 117 v. 2.0 12/93 4-13