Filter
Top Products
39
⁄3 Move the cursor to select a detection mode
using the arrow buttons and rotate the jog dial
to check the radio button next to the selected
detection mode. Press the SET button to deter-
mine the selection.
Refer to page 40 for further information about each of the
detection modes.
<ANY AREA mode>
Move the cursor to the parameter box using the arrows but-
ton (C) to select a masking duration from the following.
1 s/1 min/1 h/24 h
<VECTOR mode>
Move the cursor to an area for the settings of VECTOR
using the arrows button (C) and rotate the jog dial to select
an area. Move the cursor to the parameter box of the
selected area using the arrows button (B) to select an
interval time for an object moving between each area from
the following.
–/5 s/10 s/20 s/30 s/40 s/50 s/1 min
<DURATION mode>
Move the cursor to the parameter box of each area using
the arrows button (B) and rotate the jog dial to select a
moving duration for an object in each area from the follow-
ing.
0 s/5 s/10 s/20 s/30 s/40 s/50 s/1 min
⁄4 After setting the detection mode, press the
SETUP/ESC button.
⁄5 After selecting "EXIT" by rotating the jog dial,
press the SET button or the PLAY/PAUSE but-
ton to start searching and display the results
of the VMD search.
Notes:
• Up to 200 results will be displayed. (When 200 results
are listed, searching will stop.)
• It may take some time until the search results are dis-
played.
• It is possible to stop searching by pressing the STOP
button.
⁄6 Rotate the jog dial to select a result to be dis-
played.
It is possible to turn the page by rotating the shuttle ring.
⁄7 Press the PLAY/PAUSE button to start play-
back.
The LISTED indicator and the indicator on the PLAY/PAUSE
button will light and playback of the selected recording will
start.
Note: It is possible to skip from the playback point to the
listed time (motion detected time) by rotating the jog
dial when the LISTED indicator is lit.
To return to normal playback, press the LISTED button.
⁄8 Press the STOP button to stop playback.
The indicator on the PLAY/PAUSE button will go off and
playback will be stopped.
Live images will be displayed on monitor 2 and the VGA
monitor.
R
2
R
1
LOGOUT
MONITOR1
MONITOR2
5
9
2
6
10/0
1413
3
7
11
SHIFT SEQ
COPY
DISK SELECT
EL-ZOOM
TEXT
LOGOUT
4
8
12
OSD
MARK
1
15 16
BUSY
316
REV FWD
STOP
PLAY PAUSE
REC
-
REC STOP
SEARCH
SETUP
/ESC
PAN/TILT
SLOW
A-B
REPEAT
GOTO
LAST
LISTED
ZOOM/
FOCUS
IRIS
PRESET
/AUTO
SET
–
+
⁄8 ⁄5⁄7
⁄3 ⁄3⁄5 ⁄3 ⁄6
PAN/
TILT
⁄4
VECTOR
ANY AREA
MASKING DURATION
SET : [SETUP/ESC] SEARCH : [PLAY]
20s
20s 20s 20s 20s
20s 20s
■
VMD SEARCH
DURATION
24h
ABCD
ABCD
TIME&DATE
01ch
01ch
01ch
01ch
01ch
01ch
01ch
01ch
CAM
AUG.20.04 3:07:28 PM
AUG.20.04 3:07:27 PM
AUG.20.04 3:07:26 PM
AUG.20.04 3:07:24 PM
AUG.20.04 3:07:22 PM
AUG.20.04 3:07:21 PM
AUG.20.04 3:07:20 PM
AUG.20.04 3:07:19 PM
TIME&DATE SEARCH REC EVENT SEARCH VMD SEARCH MARK
VMD SEARCH
TOTALAUG.20.04 3:07:28 AM AUG.20.04 3:00:00 AM 200