Filter
Top Products
102
Event
Event Setup Perform the settings for the alarm output duration and the buzzer sound when an
event (motion detection, video loss, terminal/command alarm) occurs.
VMD Setup Perform the settings for the motion detection area, sensitivity and the detection
mode for each camera channel.
Alarm Setup Perform the settings for the alarm display duration and alarm suspension duration.
Terminal Setup Specify the alarm terminal polarity.
Schedule
Time Table Create timetables for each day of the week, and assign the recording action pro-
grams and event action programs to the created timetables.
REC Program Up to 4 recording programs can be created. Perform the settings for the recording
actions for each program such as image quality and recording rate for each cam-
era channel.
Event Program Up to 4 event programs can be created. Perform the settings for each program
such as the event action and the auto copy function for each event type.
Special Days Assign timetables independently for special days aside from other days.
Switcher
Monitor1 Perform the settings for the image switching on monitor 1 such as the setting of
the sequential display or the screen to be displayed at login on monitor 1.
Monitor 2 Perform the settings for the image switching on monitor 2 such as the setting of
the sequential display or the screen to be displayed at login on monitor 2.
Display
OSD Setup Perform the display settings such as the settings for the display position of the
camera title and the time.
Monitor1 Perform the display settings for monitor 1 such as the camera title display on/off,
the alarm display on/off and the time display on/off.
Monitor2 Perform the display settings for monitor 2 such as the display mode (task bar
style), the camera title display position, and the camera title display on/off.
Comm
Camera Control Set the communication type to control cameras for each camera channel.
PS·Data Setup Perform the settings for the PS·Data. It is necessary to perform these settings
when connecting an external device such as a controller to the DATA port on the
rear panel of this unit.
RS485 Setup Perform the settings for the RS485. It is necessary to perform these settings when
connecting an RS485 compatible camera to the RS485 (CAMERA) port on the rear
panel of this unit.
RS232C Setup Perform the settings for the SERIAL (RS232C). It is necessary to perform these
settings when connecting a PC to the SERIAL connector on the rear panel of this
unit.
NW Setup 1 Perform the basic network settings. It is necessary to perform these settings when
operating this unit via a network such as a LAN. The settings for the user authenti-
cation and the host authentication can also be set with these settings.
NW Setup 2 Perform the network connection settings such as IP addresses and the gateway
address. It is necessary to perform these settings when operating this unit via a
network such as a LAN.
NTP Setup Perform the NTP server settings such as the NTP server address and the time
zone setting. It is necessary to synchronize the clock with the NTP server.
Settings menu Description Page
114
114
117
118
121
119
120
123
124
126
127
128
129
130
130
131
132
133
133
134