Filter
Top Products
133
8 Data Bit
Select a data length for communication from the following.
7/8 bit
8 Parity
Select a method to check a transmission error at communi-
cation from the following.
NONE: No parity check
EVEN: Even parity
ODD: Odd parity
8 Stop Bit
Select a stop bit from the following.
1/2 bit
8 Retry Timing
Select a retransmission interval for when data reception is
not confirmed from the following.
OFF/100 ms/200 ms/400 ms/1 000 ms
● [NW Setup 1] Basic network settings
Perform the following basic network settings to operate this
unit using a PC via a network such as a LAN.
8 HTTP Port Number
Specify the HTTP port number to be used to transfer
images from this unit. It is not necessary to change it for
normal use.
8 User Authentication
Select ON and OFF whether or not to activate user authenti-
cation at the time of access from a PC to this unit.
When ON is selected, the user authentication (login) win-
dow will be displayed at the time of access from a PC.
The top page will be displayed if the entered user name
and password are registered.
ON: Activates user authentication.
OFF: Does not function.
Important:
It is recommended to select ON for the user authentica-
tion for security.
8 Host Authentication
Select ON or OFF whether or not to restrict access by IP
addresses at the time of access from a PC to this unit.
When ON is selected, only PCs with registered IP address
can access this unit
ON: Activates host authentication.
OFF: Does not function.
Note: When ON is selected for both the user authentication
and the host authentication, it is possible to operate the
unit only from a registered host. Operable functions will
differ depending on the user level setting of the authen-
ticated user. It is impossible to operate the unit from an
unregistered host.
8 Line Speed
The following are available for "Line Speed".
AUTO: Line speed will be applied automatically.
10-HALF: 10 Mbps half duplex
10-FULL: 10 Mbps full duplex
100-HALF: 100 Mbps half duplex
100-FULL: 100 Mbps full duplex
Note: When the SETUP MENU is closed after changing the
line speed, the unit will automatically restart.
8 Live Video Quality
Image quality level for a live (FQB: high quality) will be dis-
played.
It is impossible to change the value for this setting.
● [NW Setup 2] Network connection settings
Perform the following network connection settings to oper-
ate this unit using a PC via a network such as a LAN.
8 DHCP
Select ON or OFF whether or not to use the DHCP server.
When obtaining IP addresses, net mask and a gateway
address from the DHCP server, set to ON.
If not, set to OFF and enter those addresses manually.
ON: Uses the DHCP server.
OFF: Does not use the DHCP server.
8 IP Address
Enter an IP address when OFF is selected for "DHCP".
For this unit, enter 4 units from the decimal numbers (0-
254).
Schedule
Maintenance
Comm
Switcher
SETUP MENU
LIVE
System Recording Event
Display
Advanced
Camera Control
PS.DATA Setup
RS485 Setup
RS232C Setup
NW Setup 1
NW Setup 2
NTP Setup
Quick Menu
■
HTTP Port Number
■
User Authentication
■
Host Authentication
■
Line Speed
■
Live Video Quality
FQB
AUTO
00080
OFF
OFF
Schedule
Maintenance
Comm
Switcher
SETUP MENU
LIVE
System Recording Event
Display
Advanced
Camera Control
PS.DATA Setup
RS485 Setup
RS232C Setup
NW Setup 1
NW Setup 2
NTP Setup
Quick Menu
■
DHCP
■
IP Address
■
Subnet Mask
■
Gateway
■
DNS
Primary
Secondary
■
DDNS
User Name
User Password
Access Interval
■
Host Name
■
Domain Name
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
192
255
192
000
000
168
255
168
000
000
000
255
000
000
000
250
000
001
000
000
OFF
MANUAL
OFF
HD316
localdomain
10m