Filter
Top Products
23
Fast forward/Fast reverse Rotating the shuttle ring will change the playback speed (1/2x, 1x, 2x,
5x, 10x, 20x) according to rotated degree. When the shuttle ring is
held in the 20x position (rotated to the end) for 5 seconds, the play-
back speed will be 50x. When the shuttle ring is held 5 more seconds
after the playback speed became 50x, the playback speed will be
100x.
Rotating the shuttle ring clockwise will play images at a faster speed
and rotating it counterclockwise will play images in reverse at a faster
speed.
To play at normal speed, release the shuttle ring.
Hold playback speed Press the SET button while holding the rotated shuttle ring to hold a
desired playback speed. (Playback speed will be held even though
the shuttle ring is released.)
To return to the normal playback speed, press the SET button.
Skip Rotating the jog dial during playback will skip to the next or previous
recorded image.
Rotating the jog dial clockwise will skip to the start time of the next
recording and start playback, and rotating it counterclockwise will
skip to the start time of the previous one. (Rotating the jog dial coun-
terclockwise at a point shortly after the start time of the recording will
skip to the start time of the previous recording).
If there is no next or previous recorded image, current playback will
continue.
Play the latest recorded image Press the GO TO LAST button to play the latest recorded image.
When the GO TO LAST button is pressed for 2 seconds or more while
displaying live images, playback of the latest recorded images will
start.
When the GO TO LAST button is pressed during recoding, it may hap-
pen that playback starts from not the latest recording time.
Multi-screen display It is possible to display recorded images in multi-screen format
(4/7/9/10/13/16 for the WJ-HD316A, 4/7/9 for the WJ-HD309A).
q Press the SHIFT button. The SHIFT indicator will light.
w Press a camera selection button (1 - 6 for the WJ-HD316A, 1 - 3 for
the WJ-HD309A) to select a desired multi-screen.
Camera selection button 1: 4-split screen
Camera selection button 2: 7-split screen
Camera selection button 3: 9-split screen
Camera selection button 4: 16-split screen (Only for the WJ-
HD316A)
Camera selection button 5: 10-split screen (Only for the WJ-
HD316A)
Camera selection button 6: 13-split screen (Only for the WJ-
HD316A)
e To display recorded images on a single screen, press the SHIFT
button again.
After the SHIFT indicator goes off, press the camera selection but-
ton.
REV
– +
FWD
REV
– +
FWD
SET
+
PA N/
TILT
GOTO
LAST
(For the WJ-HD316A)
(For the WJ-HD309A)
SHIFT
+
SHIFT
+
1
···
6
SHIFT
+
SHIFT
+
1
···
3
REV
– +
FWD