Filter
Top Products
48
When selecting "CANCEL" using the arrows button and
press the SET button, the PRESET/AUTO PAN window will
be closed.
■ Auto Function (Auto Pan, etc)
Moves a camera with an auto function set in advance.
Important:
When monitor 1 is selected, it is impossible to move a
camera with an auto function by performing the follow-
ing steps.
In this case, perform the settings using the setup menu
of camera.
z Press the PRESET/AUTO button.
The PRESET/AUTO indicator will light and the PRESET/
AUTO PAN window will be displayed.
x Move the cursor to "AUTO PAN" using the
arrows button and check the radio button next
to "AUTO PAN" using the jog dial.
c Select "OK" using the arrows button and press
the SET button.
The PRESET/AUTO PAN window will be closed and auto
function will start.
During auto function, it is impossible to register a preset
position. To close the PRESET/AUTO PAN window, select
"CANCEL" using the arrows button and press the SET but-
ton. The setting will be canceled and the PRESET/AUTO
PAN window will be closed.
Note: Refer to the operating instructions of the camera for
further information about the auto function of the cam-
era in use.
R
2
R
1
LOGOUT
MONITOR1
MONITOR2
5
9
2
6
10/0
1413
3
7
11
SHIFT SEQ
COPY
DISK SELECT
EL-ZOOM
TEXT
LOGOUT
4
8
12
OSD
MARK
1
15 16
BUSY
316
REV FWD
STOP
PLAY PAUSE
REC
-
REC STOP
SEARCH
SETUP
/ESC
PAN/TILT
SLOW
A-B
REPEAT
GOTO
LAST
LISTED
ZOOM/
FOCUS
IRIS
PRESET
/AUTO
SET
–
+
z
x
xc
c
PAN/
TILT
PRESET / AUTO PAN
PRESET NUMBER
PRESET
AUTO PAN
32
OK CANCEL