Filter
Top Products
126
● [Monitor 2] Switcher function of monitor 2
Perform the settings for the switcher function of monitor 2.
8 Live Sequence
The settings for "Live Sequence" are the same as for
"Monitor1". Refer to page 124 for further information.
8 Sequence Timing
Select an image switching method from the following.
INT: Switches images according to the settings for "Live
sequence" of "Switcher".
EXT: Switches images when receiving a signal from an
external device.
Notes:
• Select "EXT" when an external device that can transmit
a sequence signal is connected.
• The sequence changeover I/O (pin no.21) of the
ALARM/CONTROL connector on the rear panel will
supply signals when "INT" is selected and will receive
signals when "EXT" is selected.
8 Auto Skip
The settings for "Auto Skip" are the same as for "Monitor1".
Refer to page 125 for further information.
8 Login Screen
The settings for "Login Screen" are the same as for
"Monitor1". Refer to page 125 for further information.
Event Schedule
Maintenance
Display
Comm
Switcher
SETUP MENU
LIVE
System Recording
Monitor 1
Monitor 2
Quick Menu
■
Live Sequence
■
Sequence Timing
■
Auto Skip
■
Login Screen
SETUP
INT
ON
CAM1
Advanced