Filter
Top Products
24
Marking It is possible to play from a marked point. Do the following to mark a desired
point.
1. Press the SHIFT button. The SHIFT indicator will light.
2. Press the camera selection button 12 (9 for the WJ-HD309A) (MARK) at a
desired point to be marked during playback.
Up to 100 points can be marked. When more than 100 points are marked,
the older marked points will be overwritten by the newer marked points. In
this case, the oldest marked point is the first to be overwritten.
When marked while displaying in multi-screen, the same number of split
screens will be counted as marked points. (When a point is marked while
displaying a 16-split screen, 16 points will be marked simultaneously.)
Text display It is possible to display text information attached to a recorded image during
playback.
Text display is available only when playing on a single screen.
q Pause playback.
w Press the SHIFT button. The SHIFT indicator will light.
e Press the camera selection button 11 (5 for the WJ-HD309A) (TEXT).
A - B repeat playback It is possible to play recorded images between two designated points repeat-
edly.
q Designate a start point (A) by pressing the A - B REPEAT button during
playback.
The A - B REPEAT indicator will light, and the time of point A will be dis-
played.
To cancel the designated point, press the SETUP/ESC button.
w Designate an end point (B) by pressing the A - B REPEAT button during
playback.
When the start point and the end point are set, the A - B REPEAT indicator
will start blinking.
Playback between point A and B will start and keep playing repeatedly.
The time of point A and B will be displayed during playback.
e Press the A - B REPEAT button during A - B repeat playback to return to
normal playback.
Note: When the clock of the unit has been changed by editing the time
and date settings or by the auto time adjustment function, overlapping
of the time ranges of the images recorded before and after the time
adjustment could occur.
In this case, the A-B repeat playback may not function properly.
Notes:
• Playback will be paused if the playback time caught up with the recording time (present time) when recording and play-
back are performed simultaneously.
• When playing images recorded at a high recording rate, unsteady playback speed and audio break-up may occur.
• A black screen may sometimes be displayed during fast playback/fast reverse playback. This is a normal operation.
Time of point A
Time of point A and B
ZOOM/
FOCUS
A-B
REPEAT
Blink: During the A-B repeat playback
Light: When designating a start point (A)
(For the WJ-HD316A)
MARK
12
SHIFT
+
MARK
9
SHIFT
+
(For the WJ-HD309A)
(For the WJ-HD316A)
(For the WJ-HD309A)
TEXT
11
SHIFT
+
TEXT
5
SHIFT
+