Filter
Top Products
122
n Select OK using the arrows button (CDAB), and
press the SET button.
Notes:
• The start time and end time can be set in 15 min-
utes intervals.
• To copy a timetable that is set for a different day of
the week, select "Copy the Other Time Table" and
select a day of the week by rotating the jog dial in
step 3.
Then, move the cursor to the "day of the week" box,
press the arrows button (B) and select a day of the
week by rotating the jog dial. After selecting, move
the cursor to OK and press the SET button.
• When you move the cursor to "CANCEL" in step 6
and press the SET button, the setting will be can-
celed and the pop-up settings menu of the
timetable for the selected day of the week will close.
[Screenshot 5]
The settings are applied to the selected timetable and the
timetable for all the days of the week will be displayed.
m Move the cursor to the time zone of the day of the week
to which the REC program is to be assigned using the
arrows button (CDAB).
, Rotate the jog dial to select a desired REC program/
Event program.
(Rotating the jog dial changes the displayed REC pro-
gram.)
REC program will be displayed with different colors.
Yellow: REC program 1/Event program 1
Green: REC program 2/Event program 2
Pale purple: REC program 3/Event program 3
Indigo blue: REC program 4/Event program 4
It is possible to display the assigned REC Program/
Event Program window (pages 119 and 120) by press-
ing the SET button.
Repeat steps 7 and 8 to assign REC program to other
timetables.
. Move the cursor to OK using the arrows button and
press the SET button.
→ The REC program/Event program will be assigned
to the selected time zone and the selected
timetable window will be closed.
[Screenshot 2]
The pop-up setting menu of the timetable for every day of
the week will be displayed.
The cursor will be displayed and will move to "MON"
(Monday).
x Select a day of the week using the arrows button (CD)
and press the SET button.
Note: When a signal is supplied from the ALARM/CON-
TROL connector on the rear panel the external
recording mode changeover terminal (pin no. 24) of
the unit will work with the set timetable for "EXT."
[Screenshot 3]
The pop-up settings menu of the timetable for the selected
day of the week will be displayed.
c Select "New Time Table Setup" using the arrows button
(CD) and rotate the jog dial to check the radio button.
[Screenshot 4]
The radio button for "New Time Table Setup" is checked.
v Move the cursor to the start time input box for "Period 1"
using the arrows button (CDAB).
b Rotate the jog dial to set the start time.
The end time can be set in the same way.
Repeat steps 4 and 5 to set for "Period 2" - "Period 6".
(It is not necessary to set for all of "Period 1" - "Period
6".)
Schedule
Maintenance
Display
Comm
Switcher
SETUP MENU
LIVE
System Recording Event
Time Table
REC Program
Event Program
Special Days
Quick Menu
REC
PROG1 PROG2 PROG3 PROG4
EVT
PROG1 PROG2 PROG3 PROG4
Time Table (MON)
Copy the Other Time Table
New Time Table Setup
Period 1
Period 2
Period 3
Period 4
Period 5
Period 6
12 : 00 AM
08 : 00 AM
12 : 00 PM
01 : 00 PM
05 : 00 PM
09 : 00 PM
08 : 00 AM
12 : 00 PM
01 : 00 PM
05 : 00 PM
09 : 00 PM
12 : 00 AM
O K
TUE
CANCEL
Advanced
Schedule
Maintenance
Display
Comm
Switcher
SETUP MENU
LIVE
System Recording Event
Time Table
REC Program
Event Program
Special Days
Quick Menu
REC
PROG1 PROG2 PROG3 PROG4
EVT
PROG1 PROG2 PROG3 PROG4
Advanced
Time Table (MON)
Copy the Other Time Table
New Time Table Setup
Period 1
Period 2
Period 3
Period 4
Period 5
Period 6
12 : 00 AM
08 : 00 AM
12 : 00 PM
01 : 00 PM
05 : 00 PM
09 : 00 PM
08 : 00 AM
12 : 00 PM
01 : 00 PM
05 : 00 PM
09 : 00 PM
12 : 00 AM
O K
TUE
CANCEL
Schedule
Maintenance
Display
Comm
Switcher
SETUP MENU
LIVE
System Recording Event
Time Table
REC Program
Event Program
Special Days
Quick Menu
REC
PROG1 PROG2 PROG3 PROG4
EVT
PROG1 PROG2 PROG3 PROG4
MON
TUE
WED
THU
FRI
SAT
SUN
DAILY
EXT
OK CANCEL
12AM
REC
EVT
REC
EVT
REC
EVT
REC
EVT
REC
EVT
REC
EVT
REC
EVT
REC
EVT
REC
EVT
6AM 12PM 6PM 12AM
Advanced
Schedule
Maintenance
Display
Comm
Switcher
SETUP MENU
LIVE
System Recording Event
Time Table
REC Program
Event Program
Special Days
Quick Menu
REC
PROG1 PROG2 PROG3 PROG4
EVT
PROG1 PROG2 PROG3 PROG4
MON
TUE
WED
THU
FRI
SAT
SUN
DAILY
EXT
OK CANCEL
12AM
REC
EVT
REC
EVT
REC
EVT
REC
EVT
REC
EVT
REC
EVT
REC
EVT
REC
EVT
REC
EVT
6AM 12PM 6PM 12AM
Advanced