Filter
Top Products
109
QUAD1 - 4: Displays live images from camera channels 1 -
4 on a 4-split screen.
QUAD5 - 8: Displays live images from camera channels 5 -
8 on a 4-split screen.
QUAD9 (only for the WJ-HD309A): Displays an image
from camera channel 9 on the upper left area on a 4-
split screen.
QUAD9 - 12 (only for the WJ-HD316A): Displays live
images from camera channels 9 - 12 on a 4-split
screen.
QUAD13 - 16 (only for the WJ-HD316A): Displays live
images from camera channels 13 - 16 on a 4-split
screen.
9SCREEN (only for the WJ-HD309A): Displays an image
from camera channel 1 - 9 on a 9-split screen.
9SCREEN1 - 9 (for the WJ-HD316A): Displays images
from camera channels 1 - 9 on a 9-split screen.
9SCREEN10 - 16 (only for the WJ-HD316A): Displays
images from camera channels 10 - 16 on a 9-split
screen.
16SCREEN (only for the WJ-HD316A): Displays images
from camera channels 1 - 16 on a 16-split screen.
SEQ: Images will be displayed in the sequential display.
8 Camera Partitioning
Select a controllable range for each camera channel from
the following.
View/Operate: Displaying live images and operating the
camera are possible.
View: Displaying live images is possible but cameras can-
not be operated.
--: Both displaying live images and operating camera are
impossible.
● [Host Edit] Correction of the registered host
information
It is possible to edit the registered host information.
Move the cursor to "Host IP Address" and rotate the jog dial
to select the host IP address.
The registered information will be displayed.
Editing can be performed in the same way as registration.
(Refer to page 108.)
Move the cursor to "EDIT" at the lower right on the menu
and press the SET button to complete editing.
● [Host Delete] Deletion of a registered host
It is possible to delete a registered host.
Move the cursor to "Host Delete" and rotate the jog dial to
select the host. Move the cursor to "DELETE" and press the
SET button.
The selected host will be deleted.
● [User Level] Setting of the operation level
Set operable functions at each user level (LV 1/LV 2/
LV 3).
Rotate the jog dial to display "b" to enable operation.
Leave it blank to disable operation.
Refer to the table on the next page for each function.
The default settings are shown as below.
Each parameter of the user level is as follows:
LV1: Possible to perform all the operations (Administrators)
LV2: Possible to refer the settings of the unit and the
access log, and to perform the alarm reset (Head of
operators)
LV3: Possible to monitor or play the images (Operators)
Schedule
Comm
Switcher
SETUP MENU
LIVE
Recording Event
Display Maintenance
System
Basic Setup
Time & Date
User Regist.
User Edit
User Delete
Host Regist.
Host Edit
Host Delete
User Level
Save/Load
Quick Menu
■
Host IP Address
■
Level
■
Priority
■
Default Screen
■
Camera Partitioning
LV 1
000 ...000 000 000
16 SCREEN
16
EDIT
CAM1
CAM2
CAM3
CAM4
CAM5
CAM6
CAM7
CAM8
CAM9
CAM10
CAM11
CAM12
CAM13
CAM14
CAM15
CAM16
View/Operate
View/Operate
View/Operate
View/Operate
View/Operate
View/Operate
View/Operate
View/Operate
View
View
View
--
--
--
--
--
Advanced
Schedule
Comm
Switcher
SETUP MENU
LIVE
Recording Event
Display Maintenance
System
Basic Setup
Time & Date
User Regist.
User Edit
User Delete
Host Regist.
Host Edit
Host Delete
User Level
Save/Load
Quick Menu
■
Host IP Address
DELETE
0. 0. 0. 0
Advanced
SChedule
Comm
Switcher
SETUP MENU
LIVE
Recording Event
Display Maintenance
System
Basic Setup
Time & Date
User Regist.
User Edit
User Delete
Host Regist.
Host Edit
Host Delete
User Level
Save/Load
Quick Menu
LV 1
Setup
Setup Status
Camera Setup
Event Log Status
Access Log Status
Error Log Status
Alarm Reset
Alarm Suspended Time
Copy
Normal Recording Erase
Event Recording Erase
Manual REC Operation
Playback Operation
N/W Access
LV 2 LV 3
Advanced