Filter
Top Products
65
■ Operation using the system con-
trollers
When using the system controller to which the unit
number "001" is allocated
It is possible to operate all of the WJ-HD316A/309A in the
cascade connection using an optional PS·Data compatible
controller by designating a unit number. When monitor 2 is
selected, it is possible to display images from any unit
which will be displayed on monitor 2 connected to the first
unit.
(*1)
When monitor 1 is selected, images will be displayed on
monitor 1 connected to the unit currently in use. Refer to the
operating instructions of the system controller for further
information about the PS·Data mode operation.
*1: When the WV-CU360C is used for the unit address 001,
images from the desired camera channel sometimes
may not be displayed on monitor 2 connected to the
first unit. In this case, select the desired camera chan-
nel first using the WV-CU360C.
When using the system controller to which the unit
number "002", "003" or "004" is allocated
It is possible to operate only monitor 1 connected to any
unit by designating a unit number using an optional PS-
Data compatible controller.