Filter
Top Products
134
8 Subnet Mask
Enter a subnet mask according to the network configuration
when OFF is selected for "DHCP".
8 Gateway
Enter the gateway address according to the network con-
figuration when OFF is selected for "DHCP".
8 DNS
Select "MANUAL" or "AUTO" to enable searching for an IP
address by its host name using DNS. When "OFF" is select-
ed for "DHCP" (no use of the DHCP server), select "MANU-
AL" and enter the domain name and the DNS server
address. If "ON" is selected for "DHCP" (use of the DHCP
server), select "AUTO". When DNS is not used, select "OFF".
When "MANUAL" is selected for DNS, enter the DNS server
address for "Primary" and "Secondary".
8 DDNS
Select ON and OFF whether or not to use the DDNS
(Dynamic Domain Name System).
When "ON" is selected, perform the following.
User Name: Enter the user name registered in "DDNS".
User Password: Enter the password for the user entered in
"User Name".
Access Interval: Select an interval to update DNS from the
following.
10 min/30 min/1 h/6 h/24 h
8 Host Name
Enter the host address registered in DDNS.
Enter a host name of no more than 255 alphanumeric char-
acters. Hyphens (-) are also available for the host name.
8 Domain Name
Enter the domain name of this unit.
Enter a domain name of no more than 255 alphanumeric
characters. Hyphens (-) are also available for the domain
name.
Note: The first character of the host name and the domain
name must be a letter (a - z). Do not begin with a num-
ber or a symbol character.
● [NTP Setup] Time adjustment of network
Perform the following settings for time adjustment.
8 Time Adjustment
Select ON and OFF whether or not to adjust the time with
reference to the NTP server.
ON: Adjusts time with reference to the NTP server.
OFF: Does not function.
Important:
• Time adjustment will be performed automatically when
the clock time is inaccurate to within ±5 seconds from
the standard time of the NTP server.
• The clock will not be adjusted automatically during
event recording or emergency recording.
8 Time Zone
Set the time zone in accordance with the place of use when
using the NTP server for time adjustment.
8 NTP Server Address
Enter the NTP server address when using the NTP server
for time adjustment.
8 Refresh Interval
Select an interval of time inquiry to be transmitted to the
NTP server from the following.
1 h/2 h/6 h/12 h/24 h
Important:
Recording will not be performed for around 4 seconds
when changing the present time (accurate to within ±5
seconds) using "Time Adjustment".
Schedule
Maintenance
Comm
Switcher
SETUP MENU
LIVE
System Recording Event
Display
Advanced
Camera Control
PS.DATA Setup
RS485 Setup
RS232C Setup
NW Setup 1
NW Setup 2
NTP Setup
Quick Menu
■
Time Adjustment
■
Time Zone
■
NTP Server Address
■
Refresh Interval
GMT+11:00
OFF
6h
GMT-5:00