Filter
Top Products
99
Advanced Setup—Continued
Note:
This procedure can also be performed on the AV receiver
by using its [SETUP] button, arrow buttons, and
[ENTER] button.
Speaker Distance
With the “Speaker Distance” settings, you can specify
the distance from each speaker to the listening position.
You can set the distances for front Speakers A and front
Speakers B independently. The other speakers (i.e., sub-
woofer, center, surround, and surround back) use the
same distance settings for Speakers A and Speakers B.
18
Press the [SETUP] button.
Setup closes.
1
Measure and make a note of the
distance from each speaker to
the listening position.
2
Press the [RECEIVER] REMOTE
MODE button, and then use the
remote controller’s [SP A] or
[SP B] button to select Speakers
A or Speakers B, respectively
(TX-NR906 only).
Note:
• Speakers B cannot be selected if
“Speaker Type: Front(Speaker B)” is
set to “Not Use”.
• TX-SR876 continue with step 3 after
press the [RECEIVER] REMOTE
MODE button.
These settings are set automatically by the Automatic
Speaker Setup function (see page 64).
LISTENING MODE
DISPLAY MUTING
G
U
I
D
E
E
X
I
T
PREV
CH
DIMMER
CDR/MD/DOCK
SAT
TAPE/AMP
SLEEP
REMOTE MODE
SUBTITLE
AUDIO
REPEAT
PLAY MODE
PLAYLIST
RANDOMREC
ENTER
SURR
DIRECT
THX
PURE A
STEREO
ALL ST
T
O
P
M
E
N
U
M
E
N
U
VOL
CH
DISC
ALBUM
TV
VCR
CABLE
NET/USB
DVD
RECEIVER
CD
ZONE
2
+
-
S
E
T
U
P
R
E
T
U
R
N
SP A SP B
3, 9
2
2*
4-8
*TX-NR906 only
3
Press the [SETUP] button.
The main menu appears onscreen.
4
Use the Up and Down [ ]/[ ] but-
tons to select “2. Speaker
Setup”, and then press [ENTER].
The “Speaker Setup” menu appears.
5
Use the Up and Down [ ]/[ ] but-
tons to select “3. Speaker Dis-
tance”, and then press [ENTER].
The “Speaker Distance” screen
appears.
Note:
Speakers that you set to “No” or
“None” in the Speaker Configuration
(page 95) cannot be selected.
6
Use the Up and Down [ ]/[ ] but-
tons to select “Unit”, and then
use the Left and Right [ ]/[ ]
buttons to select:
feet: Select if you want to enter
distances in feet. Can be set
from 0.5 to 30 feet in 0.5-foot
steps.
meters: Select if you want to enter
distances in meters. Can be
set from 0.15 to 9 meters in
0.15-meter steps.
2. Speaker Setup
1. Speaker Settings
2. Speaker Config
3. Speaker Distance
4. Level Calibration
5. Equalizer Settings
6. THX Audio Setup
MOVE ENTER RETURN
ENTER
RETURN
EXIT
SETUP
RETURN
RETURN
EXIT
SETUP
MOVE VALU E
2–3. Speaker Distance
Unit
Left
Center
Right
SurrRight
SurrBack R
SurrBack L
SurrLeft
Subwoofer
feet
12.0ft
12.0ft
12.0ft
12.0ft
12.0ft
12.0ft
12.0ft
12.0ft
Speaker A