Filter
Top Products
121
NET/USB (TX-NR906 only)
The AV receiver is network-ready, which means you can
hook it up to your home network with a standard Ether-
net cable and enjoy the music files stored on your com-
puter or media server. If your network is connected to the
Internet, you can also enjoy Internet radio.
NET/USB can also be used to play music files stored on
USB mass storage devices (e.g., USB flash drives and
MP3 players), which can be plugged into the AV
receiver’s front panel USB port.
Internet Radio
With Internet radio you can:
• Corresponds to M3U, PLS and Podcast playlists and
the streaming of the corresponding audio format noted
below.
• Select stations by entering the appropriate URL with
the remote controller, or connect to the AV receiver
from your computer and select stations in your Web
browser.
• Preset up to 20 Internet radio stations.
■ vTuner Internet Radio
• This unit includes the full vTuner Internet Radio Ser-
vice at no additional charge. Once you have connected
your unit to the Internet you can select vTuner Internet
Radio to search for and play Internet radio stations and
podcasts at any time. To enhance your Internet radio
experience, the http://onkyo.vtuner.com/ portal is
available to you as an easy way to browse to find sta-
tions, set up/organize your favorites, add your own
stations, get help, etc. After the first time you try Inter-
net radio/vTuner on your unit you can use the MAC
Address of your unit to create a member login account
(email address and password) on the
http://onkyo.vtuner.com/ portal. To verify your MAC
Address, please see Network Settings (page 128).
Supported Audio File Formats
For server and USB mass storage device playback, the
AV receiver supports the following music file formats:
MP3, WMA, WAV, and AAC. It also supports
Microsoft’s PlaysForSure technology.
■ MP3
• MP3 files must be MPEG-2 Audio Layer 3 format
with a sampling rate of 32 kHz, 44.1 kHz, and 48 kHz
and a bit-rate of between 32 kbps and 320 kbps.
Incompatible files cannot be played.
• Variable bit-rate (VBR) MP3 files are supported.
(Playing times may not display correctly.)
• MP3 files must have a “.mp3” or “.MP3” filename
extension.
■ WMA
WMA stands for Windows Media Audio and is an audio
compression technology developed by Microsoft Corpo-
ration. Audio can be encoded in WMA format by using
Windows Media
®
Player.
• WMA files must have the copyright option turned off.
• Sampling rates of 32 kHz, 44.1 kHz, and 48 kHz and
bitrates of between 48 kbps and 320 kbps, and lossless
DRM are supported. Incompatible files cannot be
played.
• Variable bit-rates (VBR) are supported. (Playing times
may display incorrectly with VBR.)
• WMA files must have a “.wma” or “.WMA” filename
extension.
■ WAV
WAV files contain uncompressed PCM digital audio.
• Sampling rates of 32 kHz, 44.1 kHz and 48 kHz and
bitrates of 16 kbps are supported. Incompatible files
cannot be played.
• WAV files must have a “.wav” or “.WAV” filename
extension.
■ AAC
AAC stands for MPEG-4 Audio.
• Sampling rates of 32 kHz, 44.1 kHz and 48 kHz and
bitrates of between 16 and 320 kbps, are supported.
Incompatible files cannot be played.
• Variable bit-rate (VBR) files are supported. (Playing
times may not display correctly.)
• M4A files must have a “.m4a” or “.M4A” filename
extension.
About NET/USB