Onkyo NR906 Stereo System User Manual


 
114
Advanced Setup—Continued
On the “Listening Mode Preset” menu, you can specify
a default listening mode for each of the audio formats
supported by each input selector. The AV receiver will
then select the listening mode automatically depending
on the format of the input signal. You can still select the
other listening modes, although the default listening
mode will be used the next time you turn on the AV
receiver.
Note:
This procedure can also be performed on the AV receiver
by using its [SETUP] button, arrow buttons, and
[ENTER] button.
Listening Mode Presets
1
Press the [RECEIVER] REMOTE
MODE button, followed by the
[SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
2
Use the Up and Down [ ]/[ ] but-
tons to select “5. Listening Mode
Preset”, and then press [ENTER].
The “Listening Mode Preset” menu
appears.
3
Use the Up and Down [ ]/[ ] but-
tons to select an input selector,
and then press [ENTER].
The audio formats supported by that
input selector appear.
If the input selector is assigned to an
HDMI IN, use the Down [ ] button to
select the audio formats shown on the
following screen.
For the “TUNER” input selector, “Ana-
log” is the only format available.
5. Listening Mode Preset
1. DVD
2. VCR/DVR
3. CBL/SAT
4. GAME/TV
5. AUX1
6. AUX2
7. TAPE
8. TUNER
9. CD
10. PHONO
MOVE ENTER RETURN
ENTER
RETURN
EXIT
SETUP
5–x. Listening Mode Preset
DVD
Analog/PCM
Dolby Digital
DTS
D.F. 2ch
D.F. Mono
Last Valid
Last Valid
Last Valid
Last Valid
Last Valid
5–x. Listening Mode Preset
DVD
Multich PCM
192k/176.4k
Dolby TrueHD
DTS-HD Master Audio
DSD
Last Valid
Last Valid
Last Valid
Last Valid
Last Valid
4
Use the Up and Down [ ]/[ ] but-
tons to select an audio format,
and use the Left and Right
[ ]/[ ] buttons to select a listen-
ing mode.
Only listening modes compatible with
the audio format can be selected (see
page 82).
Analog/PCM: Specifies the default lis-
tening mode for analog and PCM
sources.
Dolby Digital: Specifies the default lis-
tening mode for Dolby Digital and
Dolby Digital plus sources.
DTS: Specifies the default listening
mode for DTS and DTS-HD High Res-
olution sources.
D.F. 2ch: Specifies the default listening
mode for 2-channel (2/0) stereo sources
in a digital format, such as Dolby Digi-
tal or DTS.
D.F. Mono: Specifies the default listen-
ing mode for mono sources in a digital
format, such as Dolby Digital or DTS.
Multich PCM: Specifies the default
listening mode for multichannel PCM
sources, such as DVD-Audio.
192k/176.4k: Specifies the default lis-
tening mode for high resolution
192 kHz and 176.4 kHz digital sources,
such as DVD-Audio. (input via HDMI)
Dolby TrueHD: Specifies the default
listening mode for Dolby TrueHD
sources, such as Blu-ray or HD DVD
(input via HDMI).
DTS-HD Master Audio: Specifies the
default listening mode for DTS-HD
Master Audio sources, such as Blu-ray
or HD DVD (input via HDMI).
DSD: Specifies the default listening
mode for DSD multichannel sources,
such as SACD (input via HDMI).
5
When you’ve finished, press the
[SETUP] button.
Setup closes.