Filter
Top Products
11
Front & Rear Panels—Continued
cs Up [ ] and Down [ ] buttons (106, 135)
Used to adjust the tone, and the volume and balance
of Zone 2 and Zone 3.
ct DIGITAL INPUT button (64)
Used to assign digital inputs to input selectors.
dk LISTENING MODE [ ]/[ ] buttons (81)
Select the Onkyo original listening modes.
dl POWER switch (51)
American models do not have this switch.
This is the main power switch. When set to OFF,
the AV receiver is completely shutdown. It must be
set to ON to set the AV receiver to On or Standby.
For detailed information, see the pages in parentheses.
Speaker/channel indicators (88)
Indicate the speaker configuration and channels
used by the current input source.
: A box is displayed for each speaker that’s set
in the Speaker Configuration. No box appears for
speakers that are set to No or None.
The following abbreviations indicate which audio
channels are included in the current input signal.
BTL indicator (61)
Lights up when the “Speaker Type” setting is set to
“BTL” for bridged front speaker operation.
A and B indicators (70)
Indicate which speaker set is selected: A or B.
ZONE 2 indicator (134)
Lights up when Powered Zone 2 is being used.
Listening mode and format indicators (81)
Show the selected listening mode and audio input
signal format.
Tuning indicators (73)
HD (North American model only) (76): Lights
up if the current AM or FM station supports HD
Radio technology.
SPS (North American model only) (79):
Lights up when tuned to a HD Radio station that’s
transmitting secondary multicast channels.
RDS (77): Lights up when tuned to a radio station
that supports RDS (Radio Data System).
AUTO (73): Lights up when Auto Tuning mode is
selected for AM or FM radio. Goes off when Man-
ual Tuning mode is selected.
TUNED (73): Lights up when tuned to a radio sta-
tion.
FM STEREO (73): Lights up when tuned to a ste-
reo FM station.
SLEEP indicator (72)
Lights up when the Sleep function has been set.
Audyssey indicator (64)
Flashes during automatic speaker setup. Lights up
when the “Equalizer Settings” is set to “Audyssey”.
Headphone indicator (72)
Lights up when a pair of headphones are plugged
into the PHONES jack.
Message area
Displays various information.
Display
98
6
7
1
2
3
bmblbk
5
4
bn
FL: Front left
C: Center
FR: Front right
SL: Surround left
LFE: Subwoofer (Low Frequency Effects)
SR: Surround right
SBL: Surround back left
SB: Surround back
SBR: Surround back right