Onkyo NR906 Stereo System User Manual


 
119
Advanced Setup—Continued
Power Control
To link the power functions of -compatible
components connected via HDMI, select “Enable”.
Notes:
The
“Power Control” setting can be set only when the
above
“Control” setting is set to “Enable”.
HDMI power control only works with -com-
patible components that support it and may not work
properly with some components due to their settings
or compatibility.
When set to “Enable”, power consumption will
increase.
Refer to the connected component’s instruction man-
ual for details.
TV Control
Set to “Enable” when you want to control the AV
receiver from an -compatible TV that is con-
nected to HDMI.
Notes:
•Set to “Disable” when the TV is not compatible or
when it is unclear whether the TV is compatible or
not.
The
“TV Control” setting can be set only when the
above
“Control” and “Power Control” settings are both
set to “Enable”.
Refer to the connected component’s instruction man-
ual for details.
Network
See “Network Settings” on page 128.
Lock
With this setting, you can protect your settings by lock-
ing the setup menus.
Locked: Setup menus locked.
Unlocked: Setup menus unlocked (default).
When Locked is selected, only this “Lock Setup” item
can be accessed.
Disable: Power Control disabled.
Enable: Power Control enabled.
Disable: TV Control disabled.
Enable: TV Control enabled.
Note:
After changing the settings of the “Control”, “Power
Control”
, or “TV Control”, turn off the power to all
connected pieces of equipment and then turn on
again. Refer to the User’s Manuals for all connected
pieces of equipment.
When linking to a TV that conforms to the CEC
standard, the “Monitor Out” setting must be set to
“HDMI Main”.
Lock Setup