Filter
Top Products
5-22
The MODE ADJUST Menu
JBL
CTR WIDTH (MIN, 1 to 6, MAX)
CTR WIDTH (Center Width) adjusts the center image. When set to
MIN, the center image is heard from only the center speaker. When
set to MAX, the center image is heard from only the front left and
right speakers as a “phantom” center image. When set on the 1 to
6 scale, the center image is heard in various combinations of all
three front speakers.
CUSTOM
See page 5-17 for information about CUSTOM.
DIMENSION (FRONT, NEUTRAL ,REAR)
DIMENSION adjusts the relative balance of the soundfield, which
can be useful to achieve a more suitable balance from all speakers
with certain recordings. When set to FRONT, the soundfield is
balanced toward the front of the listening space. When set to
NEUTRAL, the soundfield is balanced at the center of the listening
space. When set to REAR, the soundfield is balanced toward the
rear of the listening space.
EFFECT LVL (-12 to +6dB)
EFFECT LVL (Effect Level) adjusts the amount of ambience applied
to the listening mode.
ENCODING (MATRIX, NONE)
ENCODING indicates the presence (MATRIX) or absence (NONE)
of Dolby Surround encoding.
ES DECODE (DISCRETE, MATRIX, OFF)
ES DECODE indicates the presence or absence of dts-ES decoding.
When the parameter value is DISCRETE, the unit is decoding a
6.1-channel discrete input type. When the parameter value is
MATRIX, the unit is decoding a 5.1-channel input type with a
matrix encoded sixth channel. When the parameter value is OFF,
the unit is decoding a standard dts (non-ES) input type.
FRONT STEERING (OFF, MUSIC, FILM)
FRONT STEERING adjusts front steering to match the input source.
When set to FILM, maximum front steering is applied. When set to
MUSIC, minimal front steering is applied. When set to OFF, no front
steering is applied. This parameter should be set to FILM for film
sources and to MUSIC or OFF for music sources.
INPUT (INPUT)
INPUT indicates the name of the selected input.
INPUT TYPE (ANLG, DOLBY D, PCM)
INPUT TYPE indicates the current input type. When the parameter
value is ANLG, a 2-channel analog audio input source is present.
When the parameter value is PCM, a 2-channel digital audio input
source is present. When the parameter value is DOLBY D, a Dolby
Digital audio input source is present.
LFE (OFF, -30 to +12dB)
LFE (Low-frequency Effects) adjusts the output level of the LFE out-
put.