Filter
Top Products
DVD1 INPUT SETUP
NAME DVD1
DIGITAL IN COAX-1
ANALOG IN NONE
ANLG IN LVL AUTO
VIDEO IN S-VIDEO-1
COMPONENT IN 1
2-CH L7 FILM
D 5.1 L7 FILM
dts L7 FILM
MAIN ADVANCED
ZONE2 ADVANCED
RECORD ADVANCED
3-6
The SETUP Menu
JBL
ANALOG IN
Selecting ANALOG IN accesses the ANALOG IN menu, which can
be used to assign the analog input connector for the selected
input. The appearance of the ANALOG IN menu depends on the
REAR PANEL CONFIG setting (see page 3-30). When 8 STEREO
INPUTS is selected on the REAR PANEL CONFIG menu, the
ANALOG IN menu will appear as it does in the illustration above.
When 5 STEREO & 5.1 ANLG is selected on the REAR PANEL
CONFIG menu, ANALOG-6, 7, and 8 on the ANALOG IN menu will
be replaced with 5.1 ANALOG.
Note:
When ANALOG IN is set to NONE, the INPUT SELECT
parameter on the MAIN ADV menu is automatically
set to DIGITAL (see page 3-13).
ANLG IN LVL
Selecting ANLG IN LVL accesses the ANLG IN LVL menu, which can
be used to adjust analog input levels. Despite industry attempts at
standardization, analog sources have a wide range of output
levels. To compensate for this, each of the eight analog inputs on
the unit can be assigned a different analog input level. This assures
optimum performance regardless of source.
Default
Parameter Value Values
AUTO ON ON, OFF
MANUAL +0dB -18 to +12dB
AUTO (ON, OFF)
AUTO provides automatic control of analog input levels. When set
to ON, the unit monitors and automatically optimizes analog input
SETUP
INPUTS
DVD1
ANLG IN LVL
SETUP INPUTS
DVD1
ANALOG IN
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
DVD1 ANALOG IN
ANALOG-1
ANALOG-2
ANALOG-3
ANALOG-4
ANALOG-5
ANALOG-6 *
ANALOG-7 *
ANALOG-8 *
NONE
INPUT SETUP
DVD1
DVD2
LD
TV
SAT
VCR
CD
PVR
GAME
TAPE
TUNER
AUX
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
DVD1 is used as an example in this illustration, and will continue to be used as an example
throughout this section. Whenever “DVD1” appears as a step in a menu path, any other input
may be substituted.
When REAR PANEL CONFIG
is set to 5 STEREO & 5.1
ANLG (see page 3-30), 5.1
ANALOG will appear in
place of these menu items.
*